Universal Testing Machine atau UTM adalah alat untuk pengujian semua benda atau material yang akan diuji cobakan sebelum digunakan dalam industri. Universal testing machine bertujuan untuk mengumpulkan data dari material yang akan digunakan di industri sehingga operator dapat mengetahui seberapa kuat atau karakteristik material tersebut.
Umumnya setiap objek atau material yang digunakan dalam suatu industri tentunya harus melewati serangkaian pengujian untuk mengetahui sejauh mana kualitas dari objek tersebut. Salah satu cara metode pengujiannya dengan uji tarik dan uji tahan menggunakan sebuah alat yang bernama universal testing machine (UTM).
Sesuai namanya Universal Testing Machine dapat digunakan untuk pengujian secara universal dan dapat diaplikasikan ke material atau benda seperti logam, baja, plastik, dll. Universal testing machine merupakan alat pengujian yang termasuk golongan Destructive Test yaitu pengujian dengan cara merusak. Kenapa harus dirusak ketika ingin di uji? karena dengan universal testing machine, kita dapat mengetahui seberapa kuat material atau bahan yang akan digunakan untuk industri nantinya maka digunakan lah pengujian ini.
Universal testing machine dapat digunakan di segala bidang inudstri seperti industri otomotif, industri rumah tangga dan masih banyak industri lain yang menggunakan universal testing machine.
Cara kerja universal testing machine ialah dengan cara memberikan gaya tekan atau gaya tarik yang ditujukan kepada material sehingga kita dapat mengetahui karakteristik dari material tersebut apakah kuat atau tidak.
Berikut produk dari universal testing machine dan untuk melihat lebih jelas silahkan klik gambar ataupun tulisan.
WDW-500E / 600E microcomputer control electronic universal testing machine
Technical indicators / test machine model |
WDW-500E/600E |
Features |
Import servo system and servo motor, all-digital measurement control system |
Maximum test force ( kN ) |
500/600 |
Host stiffness ( kN / mm ) |
1000 |
Host accuracy |
Host all the important components are imported from Japan, large-scale processing center to ensure the accuracy of testing machine |
Precision ball screw accuracy |
16 μ m / 300mm Class E All precision ball screws are grinding |
Test force measurement range |
2% of the maximum test force - 100% / 0.4% - 100% |
Test force accuracy |
Better than ± 1% of indication (precision ± 0.5% ) |
Test force resolution |
The maximum test force of 1/300000 |
Deformation measurement range |
0.2—100%FN |
Deformation measurement accuracy |
Better than ± 1% of indication (± 0.5% for precision )within 0.2% - 100% of full scale of extensometer |
Displacement resolution |
0.001mm |
Force control rate control range |
0.005—5%FN |
Force control rate control accuracy |
Within ± 2% at |
Deformation rate control range |
0.005—5%FN |
Deformation rate control accuracy |
Within ± 2% at |
Displacement rate control range |
0.005mm / min - 250mm / min |
Displacement rate control accuracy |
Rate |
Constant force, constant deformation, constant displacement control range |
0. 5—100%FN/s |
Constant force, constant deformation, constant displacement control accuracy |
Set value ≥ 10% FN , the set value of ± 0.01% or less; the set value < 10% FN ±, the set value is 1% or less |
Stretching stroke ( mm ) |
650 |
Test space width ( mm ) |
600 |
Host Dimensions ( mm ) |
1150×770×2717 |
Attached to the form |
Standard with wedge-shaped stretching attached, compression, bending with the user and other attached |
Electronic control system installation |
Bottom type |
Quality ( kg ) |
2800 |
Motor Power |
5 |
Machine form |
Floor type |
WAW-600C Servo Hydraulic UTM
Technical indicators / test machine model |
WDW-500E/600E |
Features |
Import servo system and servo motor, all-digital measurement control system |
Maximum test force ( kN ) |
500/600 |
Host stiffness ( kN / mm ) |
1000 |
Host accuracy |
Host all the important components are imported from Japan, large-scale processing center to ensure the accuracy of testing machine |
Precision ball screw accuracy |
16 μ m / 300mm Class E All precision ball screws are grinding |
Test force measurement range |
2% of the maximum test force - 100% / 0.4% - 100% |
Test force accuracy |
Better than ± 1% of indication (precision ± 0.5% ) |
Test force resolution |
The maximum test force of 1/300000 |
Deformation measurement range |
0.2—100%FN |
Deformation measurement accuracy |
Better than ± 1% of indication (± 0.5% for precision )within 0.2% - 100% of full scale of extensometer |
Displacement resolution |
0.001mm |
Force control rate control range |
0.005—5%FN |
Force control rate control accuracy |
Within ± 2% at |
Deformation rate control range |
0.005—5%FN |
Deformation rate control accuracy |
Within ± 2% at |
Displacement rate control range |
0.005mm / min - 250mm / min |
Displacement rate control accuracy |
Rate |
Constant force, constant deformation, constant displacement control range |
0. 5—100%FN/s |
Constant force, constant deformation, constant displacement control accuracy |
Set value ≥ 10% FN , the set value of ± 0.01% or less; the set value < 10% FN ±, the set value is 1% or less |
Stretching stroke ( mm ) |
650 |
Test space width ( mm ) |
600 |
Host Dimensions ( mm ) |
1150×770×2717 |
Attached to the form |
Standard with wedge-shaped stretching attached, compression, bending with the user and other attached |
Electronic control system installation |
Bottom type |
Quality ( kg ) |
2800 |
Motor Power |
5 |
Machine form |
Floor type |
Serial number |
Technical name |
WEW-300D |
WEW-600D |
WEW-1000D |
|
1 |
The maximum test force kN |
300 |
600 |
1000 |
|
2 |
Test force shows the relative error |
≤ Indication of ± 1% |
|||
3 |
Test force measurement range |
The maximum test force of 2% to 100% |
|||
4 |
Clamping method |
Hydraulic clamping |
|||
5 |
Round specimen holding diameter mm |
Φ10 ~ Φ32 |
Φ13 ~ Φ40 |
Φ13 ~ Φ60 |
|
6 |
Flat sample holding thickness mm |
0~15 |
0~30 |
0~40 |
|
7 |
Flat sample holding width mm |
80 |
125 |
||
8 |
Maximum tensile test space mm |
650 |
650 |
600 |
|
9 |
Maximum compression test space mm |
550 |
550 |
470 |
|
10 |
Control cabinet dimensions mm |
610×700×1100 |
|||
11 |
Host dimensions (including piston stroke) mm |
840×620×2210 |
950×900×2510 |
||
12 |
Host quality kg |
1600 |
1600 |
5000 |
|
13 |
Upper and lower pressure plate sizemm |
Φ160 |
204×204 |
||
14 |
Bending roller spacing mm |
350 |
600 |
800 |
|
15 |
Bending roller widthmm |
140 |
140 |
||
16 |
Allowable bendingmm |
100 |
150 |
||
17 |
Shear specimen diameter mm |
Φ10 |
|||
18 |
Piston stroke mm |
200 |
250 |
||
19 |
Piston maximum moving speed mm / min |
About 70 |
About 50 |
||
20 |
Test space adjustment agencies |
Motor reducer sprocket chain drive |
Universal Testing Machine memiliki 2 pengujian dalam 1 alat yaitu uji tarik (Tensile Test) dan uji tekan (Compression Test). Berikut cara kerja dari kedua alat pengujian ini.
Uji Tarik (Tensile Test)
Uji tarik ini menggunakan metode pada sebuah objek yang memiliki ukuran panjang dan diletakan tepat pada bagian atas alat uji universal testing machine (UTM), lalu keunci objek atau material dengan cara memutar bagian handwheel serta pastikan bahwa pengunci sudah kencang dan nyalakan alat uji universal testing machine nya.
Tujuan dari menarik objek atau material ini untuk memberikan parameter yang menunjukan nilai atau data maksimal pada kekuatan material.
Uji Tekan (Compression Test)
Pada metode uji tekan ini dibutuhkan sekiranya objek atau material yang memiliki volume atau bersifat tebal, sebab nantinya material atau objek akan diberikan tekanan yang kuat, nantinya akan terlihat di monitor data atau nilai dari sebelum hingga sesudah diberikan tekanan.
Alatuji adalah perusahaan yang menjual berbagai pengujian terpercaya yang berlokasi di jakarta timur, radin inten no 62. Jika pertanyaan seputar alat pengujian silahkan hubungi kami lewat chat online yang tersedia di web ini.