• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

Test size press (inclined type) No.2200

 

Along with upgrading of paper quality and diversification of paper kinds, the requirements for paper quality are diversified, and especially for printability, this trend is remarkable. Generally, the size press is provided with two rollers to coat size liquid on the surface to increase the surface strength of a wet paper at the press part of the paper making machine, after dewatering press, or to improve printability. The inclined type is more effective and of lower cost than the conventional inner sizing type using beater additive. In addition, the size press is widely used at the process of on-machine coating for application of primer for top coat, bearing an important role to improve paper quality and printability. This test size press can simulate as many conditions as possible of a practical paper making machine, using an excellent system with ease of handling, and ensuring high reproducibility. The mechanism is designed as follows; this is an inclined type press with two rollers of special material being laid at an inclination of 35 degrees. From the liquid tank, the size liquid is fed through a pipe onto the rollers, forming a dam of liquid between them. Between the rollers in such a state, is inserted the paper sheet semi-dried or dried (sizeless), then immediately the paper sheet is pressed in the roll nip. As an option, there is a model equipped with a coating-liquid heating and circulating system and with a device to humidify the press roll.



Spesification

Nip pressure 5 to 25 kg/cm
Press speed 40 to 100 m/min. (optional 150 m/min.)
Paper sheet standard width 250 mm, max. width 300 mm, max. length 600 mm
Press system paper sheet or continuous paper
Application amount 0.5 to 3 g/m2
Motor three-phase 200/220 VAC, 50/60 Hz, 0.75 kW
Coat liquid tank size liquid tank with jacket (optional)
Circulation pump Monoflex pump, single-phase motor 100/110 VAC, 0.1 kW
Roll heating room temperature to 800C by hot water circulation, constant temperature water tank (optional)
Air source 0.5MPa
Outer dimensions 1200x1100x1400 mm
Instrument weight 525 kg

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk Test size press (inclined type) No.2200


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji