• 021 8690 6777
    021 8690 6771_
  • 0816 1740 8927
    0817 6700 726
  • Pin: 2856BC08
    New PIN : 5A357BF9
  • 0816 1740 8925
    0812 8006 9024
    0812 9595 7914

  • 0813 1066 1358

  • sales@alatuji.com

     


Laboratory floatator No.2583

 

This floatator is needed in the deinking process as well as a highconcentration pulp breaker in the DIP and paper recycling processes. With this tester, the principle of the floating selection methodis applied to deinking. Carbon black, vehicle, etc. are lipophilic and are deposited on foams. As foams float on the liquid surface, the inking substances are removed with foams. The floatation method has become a common method of deinking as it is advantageous in that the amount of fiber loss is minor and the water consumption is limited. Rotations of the impeller cause suction of air and agitation at the same time to generate micro air bubbles. It ensures a stable pulp surface, and the internal environment is efficiently maintained to that no part of it remains stagnant. The
operator can visually check the pulp state by seeing through the stainless-framed glass specimen tank. The impeller shaft is made of stainless steel. Steplessly variable speed control is enabled. A suction air volume adjustment cock is provided for adjusting air bubble generation/termination and conditioning as needed. The froth layer discharged from the specimen tank is received in a separate retainer for measurement of the total amount.



Spesification

Specimen 75 g
Specimen tank capacity 5 l, made of SUS-304 (lined with glass)
Concentration 1 %
Rotation speed 720 to 2800 rpm
Referential standard J.TAPPI No.39 (Deinking test method for waste paper)
Power source 100/110 VAC 50/60 Hz 5A
Instrument weight 53 kg

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF


Artikel Terkait dengan Produk Laboratory floatator No.2583


NEWSLETTER

 
 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)