• 021 8690 6777
    021 8690 6771_
  • 0816 1740 8927
    0817 6700 726
  • Pin: 2856BC08
    New PIN : 5A357BF9
  • 0816 1740 8925
    0812 8006 9024
    0812 9595 7914

  • 0813 1066 1358

  • sales@alatuji.com

     


Size gum-up tester No.2001B

 

The size solution for surface sizing penetrates and stays in the paper surface while it circulates in the group of rollers of a papermaking machine. During this process, gummy aggregations form in the size liquid, affected by the contact heat of continuous paper and mechanical shear force. After winding and drying, such gummy substance forms defects on the paper surface. There are two types of machines, A and B models. The model A is a tester applying nip pressure on the rollers, with a pump to let the size liquid circulate from the constant temperature tank. With this machine, it is possible to reproduce the conditions of an actual paper making machine for the user to know in advance the stability and mixing of ingredients. The model B is a simplified type to take out size liquid from the pan through the lower roll and introduce it into the nip between two rollers. By so doing, the desired shear force is produced, and the observer can monitor and evaluate change in state of the liquid. This tester is also used as a simplified roll coater for the coating machine.



Spesification

Rubber roll 80 mm in diameter x 300 mm long, two rolls, made of NBR
Roll peripheral speed: 5 to 20 m/min.
Roll pressure 0 to 20 kg (total pressuring force)
Sample pan 200 cc (max 300 cc)
Motor three-phase 200/220 VAC, 50/60 Hz, 0.4 kW
Outer dimensions 680 x 5201 x 1200 mm
Instrument weight 146 Kg

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk Size gum-up tester No.2001B


NEWSLETTER

 
 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)