• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

Taber stiffness tester (automatic type) No.2048-D

 

Stiffness is one of important parameters for assessing the appropriateness of material for processing and printing. There are nearly proportional relationships between stiffness and beating degree, basis weight, thickness and water content. The correlation is remarkable especially with thickness. As with the No.2048-M, one end of the specimen (paper, paperboard, plastic sheet, metal foil, etc.) is held, and around the held point, the specimen is turned slowly, thereby being given flexural loads. The loading point (rotation angle) is read by a sensor when the deflection angle is 15 degrees, to calculate and output stiffness.


Feature

  • Fully automated zero adjustment, significantly reducing the measurement time.
  • Pinch the specimen, and push the AUTO switch. Measurement is done separately for right and left. Right and left data are shown on the digital display. The average of right and left results is also displayed. Very easy operation.
  • After measurement, the rotating disc quickly returns (four times faster) to the zero point.

Spesification

Measurement ranges 0 to 10 (g·cm) 150deflection, 0 to 100 (g·cm) 150deflection,
0 to 500 (g·cm) 150deflection, 0 to 1,000 (g·cm) 150deflection
0 to 2,000 (g·cm) 150deflection
Optional 0 to 5,000 (g·cm) 7.50deflection,
0 to 10,000 (g·cm) 7.50deflection
Bending speed 1800 +400/min.
Stiffness data left, right, average
Specimen size 15 to 40 mm wide, 70 mm long, 27 mm long (for 0 to 10 range) Up to 3.2 mm thick
Referential standards JIS P-8125-2000, TAPPI T489os-99, ISO 2493
Power source single-phase 100/110 VAC 50/60 Hz 1A
Outer dimensions 300x320x440 mm
Instrument weight 13 kg

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk Taber stiffness tester (automatic type) No.2048-D


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji