• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

Horizontal tensile tester (desktop type) No.2000

 

This tester holds both sides of the test specimen and pulls it at a constant speed, to determine the maximum load up to failure and the elongation at failure, and the work required for failure. When a specimen is inserted into this constant-rate-elongation machine, it is secured by two pneumatic clamps, then the test starts automatically. The load cell connected to the fixed side clamp detects load, to calculate, display and outputs on the printer the tensile strength, elongation, breaking length, tensile energy and tensile stiffness.



Spesification

Tensile loading capacity 500 N (50 kgf)
(optional: 100 N, 1000 N)
Span 80 to 200 mm, regulating increment of 1 mm,
standard: 180 mm
Tension stroke 70 (span 200 mm) to 190 mm (span 80 mm)
Tension speed 2 to 100 mm/min
Specimen width 15 mm (optional: 25, 50 mm)
Specimen clamp pneumatic type; The inserted specimen is clamped automatically. Special clamp for wet paper (optional)
Recorder (optional) can be connected
Specimen clamp pneumatic type; The inserted specimen is clamped automatically. Special clamp for wet paper (optional)
 Measurement items
  • Setting items: test name, specimen No., machine No., basis weight, specimen orientation, specimen width, span, tensioning speed
  • Measuring items: tensile strength (kNm), elongation rate (%), (optional elongation (mm))
  • Calculation items: average, maximum, minimum, standard deviation, breaking length, elongation rate, tensile energy absorption and tensile energy absorption index, tensile stiffness
  • Measurement of tensile elongation (optional) After the measurement result is outputted, the elongation is calculate by inputting the load.
 Referential standards JIS P-8113-98, T-494om-01,
ISO 1924/2
 Power source 100/110 VAC 50/60 Hz 2A
 Air source  0.5 MPa
 Outer dimensions  800x450x00 mm
 Instrument weight 48 kg

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF


Artikel Terkait dengan Produk Horizontal tensile tester (desktop type) No.2000


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji