• 021 8690 6777
    021 8690 6771_
  • 0816 1740 8925
    0816 1740 8927
    0817 6700 726
  • Pin: 2856BC08
    New PIN : 5A357BF9
  • 0816 1740 8925
    0812 8006 9024
    0812 9595 7914

  • 0813 1066 1358

  • sales@alatuji.com

     


PQW-800 Computer Controlled Light Alloy Wheel Rolling Bend Fatigue Testing Machine

 

It is mainly used to do rolling bend fatigue testing of Motorcycle or Light Motorcycle. It adopts electric measure, stepless adjusting test speed, fast and effectively installing grips. It is provided with output to computer to realize extended function.


Feature

Main test items:
(1)Test bend torque; (2) Test force; (3)Speed of tested wheel;(4) Accumulative test ileage; (5)Accumulative test revolving number
Main structure:
(1) Load frame; (2) Computer control Unit; (3) Strong electricity control Unit; (4)Test Grips;
(1) Load Frame:
It adopts floor welding structure design, conveniently install specimen, revolving drive power adopts excitation speed-adjusting motor to realize stepless adjusting speed. The surface, which installs specimen, is safely protected by safety cover.
Bend loading approach adopts step motor driving. Load is measured by load cell.
Centering mechanism on the bottom of main shaft realizes fast roughly centering.
Jumping mechanism of main shaft measure precisely centering condition by displacement sensor, and check the bending condition of main shaft in testing process at the same time, to realize emergency stop function when wheel was destroyed by fatigue.
(2)Computer control Unit:
Configured with industry control computer, A/D convert integrated card board inside computer completes signal amplifying and signal module converting.
PComputer software is supported by WINDOWS, with the function of dynamic display, saving, output test report, etc.
(3) Strong electricity control Unit:
Strong electricity controller completes to drive centering motor and control emergency stop.


Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk PQW-800 Computer Controlled Light Alloy Wheel Rolling Bend Fatigue Testing Machine


NEWSLETTER

 
 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)