• 021 8690 6777
    021 8690 6771_
  • 0816 1740 8927
    0817 6700 726
  • Pin: 2856BC08
    New PIN : 5A357BF9
  • 0816 1740 8925
    0812 8006 9024
    0812 9595 7914

  • 0813 1066 1358

  • sales@alatuji.com

     


ULTRASONIC FLAW DETECTOR TUD 300

 


Feature

  • Measuring of pitch interval and analyze of echo times.
  • Two input methods: angles and K value.
  • Auto-calibration of probe and auto-gain.
  • Two measuring unit: mm/inch.
  • All built-in software can be up-graded on PC.
  • Lock/unlock the system parameters.
  • Equipped with gate setting and alarming function.
  • Two measurement displaying mode: type A and type B.
  • Freeze/defreeze waveform and detection parameters.
  • Communicating with PC by RS232 port for transferring the measuring data and system parameters.
  • 10 detecting channels are available with a separate detecting parameter and DAC curve in every channel.
  • Automatic generation of DAC curve, and 30 points can be recorded at most, adjustable offset curves and gain correction functions are available.
  • Provided with linear suppressing function, the highest suppressing is 80% of the screen height.
  • Memory up to 300 A scanned images, parameters and DAC, and 30000 thickness values.
  • Four Rectify Ways: positive half-wave, negative half-wave, full wave and radio frequency.
  • Three detecting modes: single-probe , dual-probe ones and transmission.

Spesification

Scanning Range 2.5 mm ~5000 mm
Scanning Resolution 0.1mm (2.5mm ~100mm) 1mm (100 mm ~5000mm)
Gain Range 0dB ~110 dB
D-Delay -20μs~+3400μs
P-Delay 0μs~99.99μs£¬resolution 0.01μs
Sound speed 1000 m/s~9999m/s
Bandwidth 0.2MHz~15MHz(Low0.2~1,Mid.0.5~4, High 3~15)
Vertical linearity error ≤3%
Horizontal linearity error ≤0.2%
Dynamic range ≥32dB
Rectification Positive half wave, negative wave, full wave, and RF
Sensitivity leavings ≥60dB
Test mode Pulse-echo, dual and through transmission
Pulser Spike excitation pulser
Damping 50ohms, 150ohms and 400ohms
Reject Linear, 0-80% of full screen, variable in steps of 1%
Unit Metric/inch
Interface RS232
Printer TP UP-NH-S line thermal printer
AC requirements 85-264V AC/1.0A,47-63Hz
Temperature -10°C~40°C
Humidity 20%~90%RH
Power supply Li battery 4x3.6V 4000mAh
Charging time 4~5hours
Weight 1.47kg
Overall dimension 243mmx173 mmx70 mm

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk ULTRASONIC FLAW DETECTOR TUD 300


NEWSLETTER

 
 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)