Home | Product | Service | News Event | Article | Consultation | FAQ

Ink drying tester


Drying property of letterpress or lithography ink is evaluated, by measuring the time till the ink dries and it is not transferred to the paper even if it is pressed against the paper. Gravure ink or other inks that are dried by heating or another process cannot be used on this tester. Test principle: a printing specimen and a counterpaper-sheet are overlapped and wound around the drum rotating at a constant speed; upon them, a press gear that applies a constant load is put, and it is moved along with rotation of the drum. From the trace of the press gear on the counter-paper-sheet, the drying time and set-off of the specimen are measured.


Drum: 103 mm in outer diameter, 300 mm long, made of
acrylic resin
Rotation speed: 1/10 rpm, total scanning time 15 hours
1 rpm, total scanning time 1.5 hours
Press gear: geometry specified by JIS, press pressure 750
+- 20 gf (7.36 +- 0.20 N)
Referential standards: JIS K-5701-2000
Power source: 100/110 VAC 50/60 Hz 2 A
Outer dimensions: 660 x 210 x 265 mm
Instrument weight: 16 kg


Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :


Tidak ada video untuk produk ini

Download PDF Here