Home | Product | Service | News Event | Article | Consultation | FAQ


Taber stiffness tester (automatic type) No.2048-D

Description

Stiffness is one of important parameters for assessing the appropriateness of material for processing and printing. There are nearly proportional relationships between stiffness and beating degree, basis weight, thickness and water content. The correlation is remarkable especially with thickness. As with the No.2048-M, one end of the specimen (paper, paperboard, plastic sheet, metal foil, etc.) is held, and around the held point, the specimen is turned slowly, thereby being given flexural loads. The loading point (rotation angle) is read by a sensor when the deflection angle is 15 degrees, to calculate and output stiffness.



Features


Spesification

Measurement ranges 0 to 10 (g·cm) 150deflection, 0 to 100 (g·cm) 150deflection,
0 to 500 (g·cm) 150deflection, 0 to 1,000 (g·cm) 150deflection
0 to 2,000 (g·cm) 150deflection
Optional 0 to 5,000 (g·cm) 7.50deflection,
0 to 10,000 (g·cm) 7.50deflection
Bending speed 1800 +400/min.
Stiffness data left, right, average
Specimen size 15 to 40 mm wide, 70 mm long, 27 mm long (for 0 to 10 range) Up to 3.2 mm thick
Referential standards JIS P-8125-2000, TAPPI T489os-99, ISO 2493
Power source single-phase 100/110 VAC 50/60 Hz 1A
Outer dimensions 300x320x440 mm
Instrument weight 13 kg



Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   



Video

Tidak ada video untuk produk ini



Download PDF Here