Home | Product | Service | News Event | Article | Consultation | FAQ


Static coefficient of friction tester No.2088

Description

The coefficient of friction on paper surface is one characteristic that provides a measurement for evaluating the paper surface condition. This tester helps easy measurement of the coefficient of static friction. It works as follows. A specimen is attached onto each of the inclined driving plate and the traveling weight. As the inclined driving plate gradually increases the inclination, the weight travels at a point where the inclination exceeds the limit of the friction range of the specimen. At that point, the sensor detects the motion and stops the inclined plate immediately. The coefficient of static friction is calculated from that inclination. As the scale markings represent values of the inclination(θ), convert into tanθ, you can directly read the value of the coeficient of static friction(µ)




Spesification

Measurement range scale of static friction coefficient 0 to 1.500 (minimum increment 0.005), sliding angle scale 0 to 550(minimum increment 0.50 )
Inclined plate speed 8 mm/sec. in measurement, 16 mm/sec. in return
Specimen size specimen A 120x250 mm (maximum),
specimen B 60x150 mm (contact surface)
Traveling weight total 1000 g
Referential standards JIS P-8147-1994, TAPPI T-815om-01
Power source 100/110 VAC 50/60 Hz 1 A
Outer dimensions 470x290x410 mm
Instrument weight 16 kg



Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   



Video

Tidak ada video untuk produk ini



Download PDF Here