• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

Mullen Burst strength tester No.2025

 

The burst strength tester is designed to measure the pressure needed to make a paper sheet burst, by applying vertical pressure to the paper. This strength behaves like tensile strength, with a close relationship with machine direction tensile strength and elongation. This machine is designed to be used for the burst strength measurement
of paperboard, liner board, corrugated board, textile and the like. The principle of the machine is that the specimen is applied pressure indirectly, that is, via a rubber diaphragm by the use of glycerin. The maximum pressure at the moment the specimen bursts is read with a pressure gauge. Pressure application is made when the plunger advances forwards by the force of a motor. The specimen- clamping section are larger than those of a low-pressure type burst strength tester, enabling clamping the specimen firmly. The both clamping sections, upper and lower, are made of SUS-304 stainless steel. To secure reproducibility of test results, the tester is designed with the excellent possibility of fixing a specimen with a certain level of pressure by the handle, reading a pressure gauge on the hydraulic cylinder of the clamping section.



Spesification

Specimen clamp upper clamp 31.5 +0.05 mm,
lower clamp 31.5 +0.05 mm
Compression speed 170 +15 cc/min.
Decompression speed 340 cc/min.
Pressure gauge 1 MPa, 1.5 MPa, 2 MPa, 5 MPa
Two kinds of pressure gauges are selected
from the pressures above.
Digital display is available in option.
Referential standards JIS P-8131-1995, TAPPI T807om-03, T810om-85, ISO 2759
Power Source single-phase 100/110 VAC 50/60 Hz 2A
Outer dimensions 760x500x540 mm
Instrument weight 91 kg

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk Mullen Burst strength tester No.2025


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji