• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

Automatic pH/temperature control sheet machine No.2540

 

Paper making test needs water whose pH and temperature are constant. The effect of chemicals added to the specimen varies with pH and temperature. Both pH and temperature of feed water are detected by sensors, while sulfuric acid solution is automatically pumped in from the auxiliary tank, thereby supplying the specimen tank with water whose temperature is kept constant by steam circulation.



Spesification

Paper making size 158 mm in diameter, 200 cm2
Specimen tank size 158 mm in diameter, 400 mm high
Feed water tank 1000 l, made of stainless steel
Humidifier heat exchange tubes with steam
Heating limit 65°C
With pulp pH control chemical injection valve
In-tank agitation stationary agitator 200 W with 3 blades, 2 stages
Water temperature detection/control electronic digital temperature controller,measurement range: 0 to 65.0°C, with over heat buzzer
pH detection measurement range 0 to 14 pH
Chemical injection pump electromagnetic constant-feed pump: discharge 45 l/min.
Chemical injection tank capacity 25 l, made of polyethylene
Dimensions of paper making machine 1175X820X1585mm
Weight of paper making machine about 190 kg
Tank dimensions 1100 mm in inner diameter, 3 mm thick plate, overall height 1700 mm (not including agitator or cover)
Tank weight 280 kg
Power source 100/110 VAC 50/60Hz 13 A
Steam source pressure 0.4 MPa

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Sheet former.pdf

Artikel Terkait dengan Produk Automatic pH/temperature control sheet machine No.2540


NEWSLETTER

Subscribe now to our measurement newsletter

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji