• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0852 1556 0669 (Mr. Almas)
  • 0819 4401 4959 (Mr. Arya)
    0812 1171 0829 (Ms. Rara)
    0812 8333 5497 (Mr. Muslim)

MR-H5B ring block wear tester (Temken machine)

 

This machine is mainly used to test the bearing capacity and friction characteristics of various lubricating oils and greases under sliding friction; it can also be used to make certain metallic materials and non-metallic materials (nylon, plastic, etc.) under sliding friction. The test of wear resistance; at the same time, the friction of the material can be measured and the friction coefficient of the material can be calculated. The machine is mainly used in petrochemical, steel metallurgy, transportation and higher education institutions.



Spesification

Serial number

project name

Specifications, parameters and indicators

1

Maximum test force ( kN)

5

2

Test force accuracy

The maximum test force is 10%-100%, the relative error of the indication is not more than ±1%, and the relative error of the indication repeatability is not more than 1%.

3

Spindle speed range (r/min)

0-1500

4

Spindle speed error (r/min)

100 r/min or more and no more than ±5

5

Test oil sample temperature range (°C)

Room temperature-100

6

Temperature control accuracy (°C)

±2

7

Test force leverage ratio

10:1

8

Test force application rate (N/s)

8.92 -13.33

9

Friction rod scale scale (N/division)

0.5/100

10

Measure maximum friction (N)

380

11

Friction accuracy 

The maximum frictional force is 10% to 100%, the relative error of the indication value is not more than ±3%, and the relative value of the indication repeatability is not more than 3%.

12

Time setting range (s or min)

1-9999

13

Grease supply rate ( g/min)

45±9

14

Test ring size (mm)

Φ49.22×13.06

15

Test block size (mm)

?12.32 ×19.05

16

Test machine mainframe dimensions (length × width × height) (mm)

780×850 ×1600

17

Test machine host net mass (kg)

About 370

18

Net weight of accessories and tools such as weights and levers (kg)

About 70

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk MR-H5B ring block wear tester (Temken machine)


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji