• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0852 1556 0669 (Mr. Almas)
  • 0819 4401 4959 (Mr. Arya)
    0812 1171 0829 (Ms. Rara)
    0812 8333 5497 (Mr. Muslim)

MM-W1A vertical universal friction and wear testing machine

 

MM-W1A vertical universal friction and wear testing machine, its main purpose and function are similar to the US FALEX6# multi-purpose sample test machine (Multi-Specimen-Test Machine ), and with our company MM-W1 vertical universal The use of the friction and wear tester is basically the same.

 

The machine has a frictional form of rolling, sliding or sliding composite motion under a certain contact pressure. It has a stepless speed regulation system, which can be used to evaluate lubricants, metals, plastics, and coatings under extremely low speed or high speed conditions. Friction and wear properties of layers, rubber, ceramics, etc., such as low-speed pin plate (with large and small plates, single and three needles) friction function, four-ball long-term anti-wear performance and four-ball rolling contact fatigue, ball-bronze three-piece lubrication Performance, as well as tests for thrust washers, ball-disc and stick-slip properties.



Spesification

Serial number

Technical name

Technical Parameters

1

Maximum test force ( kN )

1

2

Test force measurement range

0.4%-100% of the maximum test force

3

Indication error below 200N (N)

≤ ±2

4

Relative error of indication value above 200N

≤ ±1%

5

Automatically maintain relative error of indication value when test force is long

≤ ±1% FN

6

Test force indication digital display device zero return error

≤ ±0.2% FN

7

Measuring the maximum friction torque (N·m)

2.5

8

Friction torque indication relative error

≤ ±2%

9

Friction load cell (N)

50

10

Friction arm distance (mm)

50

11

Friction torque indication digital display device zero return error

≤ ±0.2% FN

12

Continuously variable transmission system (r/min)

1 ~ 2000

13

Special deceleration system (r/min)

0.05 to 20

14

Spindle speed error above 100r/min

Not more than ±5rpm

15

Spindle speed error below 100r/min

Not more than ±1 rpm

16

Test medium

Oil, water, mud, abrasives, etc.

17

Heater working range (°C)

Room temperature ~ 260

18

Disc heating plate

Φ65 , 220V , 250W

19

Nested heater

Φ70×34 , 220V , 300W

20

Temperature measurement control accuracy (°C)

±2

twenty one

Test machine spindle taper

1 : 7

twenty two

Maximum distance between the test machine main shaft and the lower sub-disc (mm)

≥ 75

twenty three

Test machine spindle control mode

Manual control time control revolution control friction torque control

twenty four

Test machine time display and control range

1s~9999s ( min )

25

Test machine revolution display and control range

0 to 9999999

26

Test machine main motor output maximum torque (N·m)

5

27

Test machine dimensions ( length ×width × height ) (mm)

600×682×1560

28

Testing machine quality (kg)

About 450

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk MM-W1A vertical universal friction and wear testing machine


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji