• Alat Uji
  • eki.alatuji@gmail.com

  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • 0813 1066 1358 (Ms. Eki)
    0812 9595 7914 (Mr. Parmin)
  • 0878 7867 0721 (Mr. Arya)

DynaTree Root And Trunk Testing System


he stability of urban trees is a key question that affects everyone. Diseased and unstable urban trees pose much risk for everyone, and are a serious liability for municipalities in case of an accident. Tree stability assessment is therefore of the utmost importance. At present, there is only one accepted method for root stability assessment (inclino pulling test), while there are a few options to evaluate the condition of the trunk (elasto pulling test, tomographies).


Usage Instruction

  1. Assemble the anemometer tower in the vicinity of the tree(s) to be assessed. Attach the anemometer on the top, and erect the tower. Wind velocity readings are sent to, and data is collected at the instrument box located at the bottom of the tower.
  2. Start recording data by pressing the START button located in the instrument box.
  3. Mount the inclinometer on the root collar of the tree to be assessed.
  4. Mount the elastometers onto the trunk of the tree to be assessed. Connect them to the central unit.
  5. Start recording data by pressing the START buttons located on the side of the instrument box.
  6. Repeat the previous 3 steps if you have more inclinometers and/or elastometers want to assess multiple trees.
  7. Record data for at least 3 hours (the longer the better).
  8. After the recordings are finished, transfer the acquired data to a PC by removing the internal SD card or by switching the instruments to Wi-Fi mode.
  9. Load the data into the DynaTree evaluation software and calculate the safety factor.




  • Inclinometer recorder (min 1 pcs., recommended 3 pcs.)
  • Base plate with ball head
  • 2 elastometers in quick mounting house
  • Dual elastometer box
  • Screw and screwdriver
  • Software on CD
  • User's manual
  • Lead batteries and charger
  • Alu case
  • Anemometer (ball type or ultrasonic) and recorder
  • 10 m portable pole
    • Alu tube (6 sections)
    • Steel anchor rod (3 pcs.)
    • 12 m long rope (3 pcs.)
    • Case





Sampling rate 1 Hz

Measurement range 0-150 km/h

Accuracy 0.2 km/h

Integrated GPS G-STAR IV BU-353-S4

Maximal SD card size 8GB

Wheatherproof yes, IP65

Dual axis inclinometer

Measurement range ±2°

Resolution 0.001°

Sampling rate 10 Hz

Integrated GPS G-STAR IV BU-353-S4

Maximal SD card size 8GB

Weatherproof yes, IP65

Operating voltage and currents 12 V, 20 mA



Dimensions 30x30x270 mm

Span 250 mm

Sampling rate 10 Hz

Resolution 0.3 μm

Power source 2 pcs. of 9 V batteries




Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :


Tidak ada video untuk produk ini


Download PDF

Tidak ada file catalog untuk produk ini

Artikel Terkait dengan Produk DynaTree Root And Trunk Testing System





Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)


Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)


Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)


Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji