• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

Model: 682C03

 

Platinum Stock Products: DIN rail mount vibration transmitter (for use w/ICP sensor), 4-20 mA outputs for vibration and temperature, 0-5/0-10 VDC output for vibration, raw vibration output


Feature

 

  • Output Signal: 4 to 20 mA
  • Frequency Range: (-3dB) 180 to 600000 cpm (3 to 10k Hz)
  • DC Power: 23 to 25 VDC

 

 


Spesification

 English:SI: 
PERFORMANCE
Channels 1 1  
Input Signal (Vibration) ±100 mV/g ±10.2 mV/(m/s²) [8] 
Input Signal (Temperature) 0 to 1.2 VDC 0 to 1.2 VDC [5] 
Output Signal (DC Vibration) 4 to 20 mA 4 to 20 mA [4] 
Output Signal (DC Vibration) 0 to 5 VDC 0 to 5 VDC [6][9] 
Output Signal (DC Vibration) 0 to 10 VDC 0 to 10 VDC [6][9] 
Output Signal (Temperature) 4 to 20 mA 4 to 20 mA [5] 
Output Signal (±0.01 %) (AC Vibration) 100 mV/g 10.2 mV/(m/s²) [1] 
Frequency Range (-3 dB) (Acceleration) 180 to 600000 cpm 3 to 10k Hz [2][10][11] 
Frequency Range (-3 dB) (Velocity) 210 to 600000 cpm 3.5 to 10k Hz [2][10][11] 
Frequency Range (-3 dB) (Displacement) 210 to 60000 cpm 3.5 to 1000 Hz [2][3][10] 
Output Range (DC Acceleration) 0 to 5.00 g pk or rms 0 to 49.03 m/s2 pk or rms [7][8][9] 
Output Range (DC Acceleration) 0 to 10.00 g pk or rms 0 to 98.06 m/s2 pk or rms [7][8][9] 
Output Range (DC Acceleration) 0 to 20.00 g pk or rms 0 to 196.12 m/s2 pk or rms [7][8][9] 
Output Range (DC Velocity) 0 to 0.5 in/sec pk or rms 0 to 12.7 mm/s pk or rms [7][8][9] 
Output Range (DC Velocity) 0 to 1.00 in/sec pk or rms 0 to 25.4 mm/s pk or rms [7][8][9] 
Output Range (DC Velocity) 0 to 2.00 in/sec pk or rms 0 to 50.8 mm/s pk or rms [7][8][9] 
Output Range (DC Displacement) 0 to 10.0 mil pk - pk 0 to 0.254 mm pk - pk [7][8][9] 
Output Range (DC Displacement) 0 to 20.0 mil pk - pk 0 to 0.508 mm pk - pk [7][8][9] 
Output Range (DC Displacement) 0 to 40.0 mil pk - pk 0 to 1.02 mm pk - pk [7][8][9] 
ENVIRONMENTAL
Temperature Range (Operating) -13 to 158 °F -25 to 70 °C  
Temperature Range (Storage) -40 to 257 °F -40 to 125 °C  
Humidity Range (Non-Condensing) 0 to 95 % 0 to 95 %  
ELECTRICAL
Power Required DC Power DC Power  
DC Power 23 to 25 VDC 23 to 25 VDC  
DC Power (maximum) 100 mA 100 mA  
Settling Time <2 min <2 min  
Excitation Voltage (delivered to sensor) 17 to 19 VDC 17 to 19 VDC [12][13] 
Constant Current Excitation (delivered to sensor) 3 to 5 mA 3 to 5 mA [12][13] 
Output Span (±5.0 %) (DC Vibration Current Output) 16 mA 16 mA  
Output Span (±5.0 %) (Temperature Output) 16 mA 16 mA  
Output Span (±5.0 %) (DC Vibration Voltage Output) 5 or 10 VDC 5 or 10 VDC [9] 
PHYSICAL
Electrical Connector (input/output) Removable Screw Terminals Removable Screw Terminals  
Electrical Connector (raw vibration output) BNC Jack BNC Jack  
Housing Material Polyamide Polyamide  
Size - Height 3.9 in 99 mm  
Size - Width 0.9 in 22.5 mm  
Size - Depth 4.5 in 114.5 mm  
Weight (Maximum) 6.4 oz 127  
Screw Terminal Wire Size 24-14 AWG 24-14 AWG  
Din Rail Mount 1.38 in 35 mm  
Status Indicator (Power "on") Green LED Green LED  
Status Indicator (Input Fault) Red LED Red LED  
Status Indicator (Measurement Mode - Acceleration) Green LED Green LED  
Status Indicator (Measurement Mode - Velocity) Green LED Green LED  
Status Indicator (Measurement Mode - Displacement) Green LED Green LED  

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Achieved with 100 mV/g ICP® accelerometer input.
[2] Attenuation is -40 dB/decade.
[3] Maximum 1,000 Hz for displacement.
[4] Output current voltage will fluctuate at frequencies below 5 Hz.
[5] Requires use of accelerometer with "TO" temperature output option.
[6] Factory set, 0-5 VDC.
[7] Factory set, 1.0 in/sec peak
[8] Output measurement range is based upon input from 100 mV/g ICP® accelerometer and will be scaled inversely proportional to any percentage deviation of this input.
[9] Internal Dip switch selectable
[10] The low frequency tolerance is accurate within ± 0.5 Hz of the specified frequency.
[11] The high frequency tolerance is accurate within ± 0.5 kHz of the specified frequency.
[12] Jumper selectable for 18 VDC regulated, 24 VDC power supply voltage or ICP® sensor excitation disabled
[13] 4 mA constant current diode is internal to 9330VT
[14] See PCB Declaration of Conformance PS152 for details.
Accessories:
No Accessories
Optional Versions:
No optional versions

 

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk Model: 682C03


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji