• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

Ink drying tester

 

Drying property of letterpress or lithography ink is evaluated, by measuring the time till the ink dries and it is not transferred to the paper even if it is pressed against the paper. Gravure ink or other inks that are dried by heating or another process cannot be used on this tester. Test principle: a printing specimen and a counterpaper-sheet are overlapped and wound around the drum rotating at a constant speed; upon them, a press gear that applies a constant load is put, and it is moved along with rotation of the drum. From the trace of the press gear on the counter-paper-sheet, the drying time and set-off of the specimen are measured.


Feature

Drum: 103 mm in outer diameter, 300 mm long, made of
acrylic resin
Rotation speed: 1/10 rpm, total scanning time 15 hours
1 rpm, total scanning time 1.5 hours
Press gear: geometry specified by JIS, press pressure 750
+- 20 gf (7.36 +- 0.20 N)
Referential standards: JIS K-5701-2000
Power source: 100/110 VAC 50/60 Hz 2 A
Outer dimensions: 660 x 210 x 265 mm
Instrument weight: 16 kg


Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk Ink drying tester


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji