• Alat Uji
  • sales@alatuji.com


  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • Sales Alat Pengujian
    0812 9595 7914
    0813 1066 1358
    0878 7867 0721
  • Alat Uji
  • Sales Jasa Pengujian
    0812 1930 1958



  • Long-term reliability
  • High resolution and accuracy
  • Rugged: housing resistant to impact and corrosion
  • Easy to install and use
  • No maintenance needed
  • Frequency signal output easy to process and transmit over long distances
  • Integrated temperature gauge
  • Watertight to 1500 kPa standard
  • Frequency measured in sustained or dampened mode


The C-110 strain gauge consists of a thin-wall steel tube with two steel heads soldered to its extremities using
solder with a low modulus of deformation. The distance between fl anges of the heads determines the gauge
length. A small rectangular housing at the gauge midsection encloses the electro-magnetic excitation and
pick-up coils. The electrical resistance of one of the electromagnetic coils provides temperature data, in which case the gauges are delivered with a 5-conductor cable. A 4-conductor cable is used when temperature measurements are not required. Unless specifi ed, gauges are factory-set at mid-range, al lowing one half of the range for measurement of tensile strain, and the other half for compressive strain.


The C-110 strain gauge is designed for embedment in fine aggregate concrete to measure strain caused by variations in stress. If the modulus of elasticity of the material is known, the magnitude of the strain (other than that induced by loading) can be evaluated. In the case of concrete, the effects of temperature, creep, and the autogenous reaction must be known. Typical examples of concrete structures where vibrating wire strain gauges are used include:

  • Dams
  • Nuclear power stations
  • Bridges and viaducts
  • Large buildings
  • Tunnel linings
  • Piles and caissons



Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :


Tidak ada video untuk produk ini


Download PDF

Tidak ada file catalog untuk produk ini

Artikel Terkait dengan Produk EMBEDDED VIBRATING WIRE STRAIN GAUGE Model C-110





Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)


Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)


Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)


Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji