• Alat Uji
  • sales@alatuji.com

     

  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

Balancing Machine Model H-30 Belt Drive

 

MACHINE SETTING 

Unlike soft bearing machines, which have complicated calibration procedures, in ABRO 'hard bearing' machines the procedure is extremely simple. After mounting the job on the machine, one has simply to feed the following: 

(1) balancing speed desired;
(2) job configuration in use;
(3) the job dimensions a,b,c,rL and rR.

The machine is now ready for operation. Nothing else has to be done. 

MACHINE OPERATION 

The basic design of the ABRO machines makes their operation very simple. Besides, the auxiliary equipment is a further help, e.g. in the case of crankshaft, multiplane electronic units giving the unbalance simultaneously for various correction planes that lie on the counterweights ; pneumatic job clamping and raising devices facilitate drilling on the machine, drilling on the machine, drilling units with electrical traversing and automatic positioning, complete with chip suction arrangements add up to make balancing simpler and faster. Similarly, for other applications, ABRO offer a variety of auxiliary equipment. Therefore, to get the most suitable solution, spell your exact requirement to ABRO.
 
SPECIAL APPLICATION & ADVANTAGES
 
For high accuracy balancing 

Synchronised filters automatically track the balancing speed by photoelectric scanning, completely eliminating all disturbing vibrations. This also ensures that speed changes do not affect readings, thus giving the most reliable and accurate results. 

Surface belt-drive machines are offered, when necessary, to eliminate parasitic unbalances due to the eccentricities and unbalances of drive shafts, adaptors etc. of the end-drive machines.
 


Feature

Scope Of Supply
- Machine bed: 1no.
- Pedestal with roller support: 2 nos.
- Belt Drive arrangement: 1 no.
- Drive motor: 1 no.
- Heavy duty end stoppers: 2 nos.
- Belts: 2 nos.

- Pick up: 1 no.
- Power Supply PCB: 1 no.
- ISO Test rotor with test weights as per ISO 21940-21 suitable for URR & UMAR test
- Complete Computer based electronic system housed in 19” rack panel with window based operating system.
- All connecting cables within machine limits
- Complete electrical switch gear panel
- Operating Tools for the machine
- Installation, Commissioning & Training by ABRO Engineer.


Spesification

- Type of electronics :Computer based electronics with TFT display type MP-102
- Max. weight on rollers for symmetrical rotors: 450 Kg
- Max. weight capacity per pedestal:225 Kg
- Max job diameter capacity:1100 mm
- Max. job length accommodated between bearing centres:1550 mm
- Journal diameter range: 12-100 mm
- Balancing Speed range of electronics: 400 - 6000
- Drive Power: 2.2 KW with Variable frequency drive

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Testimoni


Artikel Terkait dengan Produk Balancing Machine Model H-30 Belt Drive


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji