• Alat Uji
  • sales@alatuji.com

     

  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

Paper Making Test Equipment | 136-2

 

The 136-2 Hand-Held Tension Meter accurately measures the line tensions on running WET & DRY FELTS as well as on the FORMING FABRIC, SIEVE or WIRE. Designed specifically for use in the extremely harsh conditions around most papermaking presses, the 136-2 provides continuous tension values or peak tension values while the press is operating. The D-485 Tension Indicator can be mounted on the sensor for convenient one-hand operation, or held separately connected via cable.

The 136-2 features a spring-loaded handle, which eliminates errors, caused by uneven pressure applied by operators. It makes taking measurements as simple as pressing the sensor gently on the web until the handle reached the mechanical stop. Ball-bearing mounted rollers support the measurement head at speeds up to 1000 m/min. For higher speeds, a low friction, ceramic-coated stabilizing plate is offered.

Not only does the 136-2 measure static and dynamic web tensions, but it also makes it possible to compare the tension in different parts of the web. The rugged 136-2 is fabricated from Stainless Steel and is water-resistant and rustproof, ensuring trouble-free use even in wet environments. The tension value is displayed on either the D485 Digital Tension Indicator or TM353 Analog model. The indicators can be mounted together with the sensor or used separately connected with a cable.


Feature

  • High overload capacity
  • Water-resistant design

Spesification

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk Paper Making Test Equipment | 136-2


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji