• Alat Uji
  • sales@alatuji.com

     

  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

Cable Tension Meter | QB-10000

 

The new QB-10000 Tension Meter provides a quick and easy way to accurately measure and display all of the elevator traction cable tensions in a set while the tension on a single cable is being adjusted. This makes it extremely easy to balance the tensions of cables in a set of elevator cables or any other multiple-line array of tension cables, such as tower and stack guy wires, crane rigging sets and platform lifts, etc. The digital display also shows the average tension of the set as well as the total tensile load.

The QB-10000 installs easily, measures cable tension up to 10,000 lbs directly, stores readings and is removed from the cable in seconds. No lookup or reference to correction or conversion charts is required. Writing down measurements for comparison purposes is also not required.

Balancing the tensions on a set of cables takes minutes instead of hours and can be done by a single person, working alone, instead of two or three.


Feature

  • DIRECT READING -- no reference to conversion charts required
  • Minimum training time required. Significant labor and time savings over alternative methods
  • View tensions on all cables in the set, average tension and total tensile load on the back-lit display - instantly. Display also features full text prompts
  • Balance tensions in multiple lines in minutes
  • Accommodates wide range of cable types and sizes, from 3/16” to 1”
  • Factory-provided 5-line display for four (4) cables can be optionally expanded to as many as 16 cables by keypad entry and scrolling
  • One (1) set of sheaves for wire rope sizes from ¼” to ¾” is included. Other size sheaves are optionally available
  • Calibration for three (3) wire rope sizes is included. They are for steel, 1/2", 9/16” and 5/8”, all 8x19. Calibration for up to five (5) additional sizes or types is optionally available
  • Safety improvement gained by measurement method
  • Highly visible yellow finish with easy to use soft-key interface
  • Powered by two (2) standard, easily-replaced AA batteries to provide long life between changes
  • 2-Year Warranty

Spesification

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk Cable Tension Meter | QB-10000


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji