• Alat Uji
  • sales@alatuji.com

     

  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

AU - 1007 B Folding Endurance Tester (Schopper Type)

 

Schopper Type instrument with Five Figure impulse Counter - Loading clamps of spring type giving standard load of 1000 gm during the test. With Five-Figure impulse Counter having hold and zero setting. Two horizontally opposed and movable clamping jaws, which hold specimen 100 mm (4 inches) long under variable tension during the folding cycle, while a slotted folding blade, sliding back and forth between four creasing rollers, folds the paper at 120 double folds per minute

One complete oscillation of the test piece, during which it is folded first back wards and then forwards about the same line and this oscillation is double fold. 

The Equipment is used for determining the Folding Endurance of all kinds of paper, foil and films upto 0.25 mm or less.

Extra Optional: 

Die & punch strip cutter 15x100 mm for specimen. 



Spesification

SPECIFICATIONS

Folding Endurance Tests have been used for the estimation for the suitability of the paper in use to withstand repeated bending, folding, and creasing.

Two specimen can be tested simultaneously. The number of folds is registered by two six figure impluse counters with hold facilities when the respective head stopped automatically upon the rupture of first specimen and automatic switched off the instruments upon the rupture of second specimen.

Front Panel consist of start, stop, push button, with light indicator which indicate the on/off position of electric motor. A /aluminium sheet cover to protect it from dirt.

Working Unit

: Two speartely working folding units for quicker    test.

Testing of Paper

: 0.25 mm thickness of paper

Specimen width

: 15 mm

specimen length

: 98 mm

Clamping length

: 90 mm

Stretching force

: Maximum 9.81 N and Minimum 7.55 N

Folding Roll Diameter

: 6 mm

Distance Between folding rolls

: 0.5 mm

Working speed

: 120 strokes / min.

Deflection on either side

: 10 mm.

Power Supply

: 1 Phase, 220 ± 10% V AC, 50 Hz.

Applicable standard

: TAPPI T 423 ISO 5626, IS:1060 (Part-I)
   IS:1848-1991
   equivalent.

Option
Test Strip Cutter for specimen 
size
 15 X 100 mm.
 

Shipping Data

Ordering Data

 

Net Weight

Model No.

 

Gross weight

Voltage

 

Dimension

Frequency

Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk AU - 1007 B Folding Endurance Tester (Schopper Type)


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji