• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

AU - 1014 Print Surface Roughness / Smoothness Tester

 

This equipment measures the roughness/smoothness as per the condition apply in the printing press nip at the moment of printing, by clamping the sample between a precise measuring head and a specially backing assembly with variable clamping pressure. Ideally suitable for writing, printing/coated paper and board. The micrometer values measure directly on calibrated Variable Area Flow Meters (Rotameters). 
Measuring Range:
0.9 6.0 (Micrometers)



Spesification

SPECIFICATIONS

Roughness / Smoothness
The roughness or smoothness of a sheet of paper or board is a function of the rate at which air will pass between a specified flat land and sheet of the paper or board when tested under specified conditions. The property is termed roughness if increasing numerical value indicate increasing roughness. It is named smoothness of increasing numerical values indicate increasing smoothness.

Print Surface Roughness
Air at regulated pressure is passed between a thin metal metering (51 micron wide) and the test paper surface, whereby the resistance of air-flow is measured. The roughness of the sample is calculated as micrometers on calibrated air flow meter as the cube root mean cube gap.

Measuring Range

: 0.6 - 6 micron.

Contact Pressure
Selected by rotary switch

: Variable 5 Kgf / cm2
  10 kgf / cm2
  20 kgf / cm2

Air Pressure:
Selected by rotary switch

: Regulated from 0 to 3.0 wg / inches

Instrument air requirement

: 0 - 7 kg / cm2 compressed air

Accessories:

Soft backing head
Offset blanket backing head
Hard metal backing dummy head.
Calibrations disk.

Options:

Other model measuring range 0.6 to 9.6 micron.

Compliance with International Standards
ISO 8791-02, ISO 8791-3, BS 656

Shipping Data

Net Weight
Gross weight
Dimension

Ordering Data

Model No.
Voltage
Frequency

Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change.

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk AU - 1014 Print Surface Roughness / Smoothness Tester


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)