• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

AU - 1015 B Fluff Tester (GFL Type)

 

The fluff tester (GFL Type) is intended for laboratory determination of the linting tendency / short fiber of uncoated printing paper.

ACCESSORIES:

Special Black filter paper Dia70 mm with minimum density. 

Vacuum filtration unit with high capacity filtration membrane attachment for the drying of lints on black filter paper.



Spesification

SPECIFICATIONS

  • Linear pressure 490 N/m roll width.

  • Peripheral speed 0.4 m/s

  • Stainless Steel roll.

  • Standard Rubber roll.

  • Water tray, approx. 0.3 dm3.

  • Filter paper, black, 70 mm diameter,

  • Motorized paper feeding arrangement for better reproducibility

  • Complete test series comprises 200 sheets in A4 size, test time approx. 14 min.

Connection:
Power supply 220 V, 1 Phase, 50 Hz, 150 W

sample size

: 210x 297 mm with the fibre direction longitudinal to the nearest    edge of 297 mm to keep off the lints on cut edge, automatic setting    with delay timer to rest the upper rubber roller on paper sheet after    cut edges

 

No of
sheets

: 200 pcs corresponding area 9.6 m2

Required time

: 14 /15 minutes

 

: 0.5 kp/cm2

Roller specification

 

Upper Rubber
Roller

: Made of poly choloroprener rubber dia 40 mm and the    hardness 80 dgree shore

 

Lower steel Roller
microns

: stainless steel roller dia 92 mm with milled pyramid surface    depth 30

peripheral speed

: 0.4 M/sec

dimension

: Length 560 mm
  Width 450 mm
  Height 350 mm

Power supply

: 220 volt single phase 50 hz , 150 watt

Wt

: 55 kgs

Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to changes.

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk AU - 1015 B Fluff Tester (GFL Type)


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji