• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

AU - 1026 A Laboratory Crush Tester

 

The ring crush resistance of paper and paperboard is the maximum compressive force that a test piece will sustain without being crushed, the test piece being in the form of a ring standing on one end, and the force being applied to the other end under specified conditions.

Crush Tester (Beam deflection method) motorized is operated with dial indicator and peak pointer - Load range: 0-50 , 0-100 Kg. Accuracy within 20% to 80% of the normal range of deflection Platen size 100 x100 mm RCT sample holder and removable disc (08 numbers) for a thickness of 0.15 mm to 0.49 mm (supplied with main unit). 

Platen size 100 x100 mm.



Spesification

SPECIFICATIONS

Width of test strips : 12.7 mm.
Maximum Distance of thrust plate : 80 mm.
Platen size : 120 X 120 mm.
Load Range : 0-50 Kg with a graduation of 0.1 Kgf. higher capacity version is available
Compression Speed : fixed, 12.7 ± 2 mm / min.
Thickness of test specimen mm : Min 0.15 with replacable 8 disc Max 0.49 mm
Sample Holder : A aluminimum metal block containing annular groove 6.35 mm ± 0.25 deep and with an outer dia meter of 49.30mm supplied with eight remov able disc for different thickness of test strips.
OPTION

Precision Test Strip Punch & Die Cutter – For preparation of test pieces towards use in Ring Crush Tests. Width 12.7 mm.

Circular Cutter - For cutting out circular sample of board and similar materials. One test specimen at a time for measurement of Flat Crush Test

Circular Neck Down Cutter – for preparation of test pieces for measurement of Edge Crush Test.

Pin Adhension Attachment- For glued joint strength in corrugated fibre board.

Concora Medium Flutter Model UEC-3003-For producing a sample to evaluate FCT/CMT value

APPLICABLE STANDARDS:
ASTM D-1164-53, ASTM D-1125-54, TAPPI T-472 m-51
0-100 Kg., 0-150 Kg., 0-250 kg.
Shipping Data Ordering Data
Net Weight Model No.
Gross weight Voltage 220 volts, single phase 50 Hz, 1/15 HP
Dimension Frequency

Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk AU - 1026 A Laboratory Crush Tester


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)