AU - 1026 B Electronic Laboratory Crush Tester

Measuring Results:

: Breaking Force in Newtons.

Stroke Length:

: 76 mm.

Deformation Speed

: Calibrated 12.0 mm/min or variable speed selectable    upto 50 mm/min.

Return Speed

: maximum

Plate Size

: 125 X 125 mm.

Measuring Range

: ± 1% of measured value but not better than 0.5% of the    nominal value

Rupture Sensitivity

: 2 - 20 % of the relevant maximum load.

Thickness of test

: Min 0.15 with replacable 8 disc

specimen mm

: Max 0.49 mm

Sample Holder

: An aluminimum metal block containing annular groove    6.35 mm

deep

: and with an outer dia meter of 49.30mm supplied with    eight remov able disc for different thickness of test strips

Precision Circular Punch & Die cutter:

: For preparation of test pieces towards Ring Crush    Test. Width 12.7 mm x 152 mm.

Circular Cutter

: For cuting out circular sample of board and similar    materail towards use in Flat Crush Test.

Circular Neck Down Cutter

: For preparing test peices for measurement of Edge    Crush Test

Sample cutter for edge crush test

: Pneumatic width 25 mm, 50 mm

Concora Medium FlutterModel UEC-3003

: For producing a sample to evaluate FCT/CMT    value

Applicable Standards

APPITA/AS 1301.449, FEFCO No. 50

Concor Medium Test

CPPA D.24, DIN 53143, ISO 7263, SCAN P27, TAPPI T809.

Ring Crush Test

CPPA D.33, DIN 53134, SCAN P34, TAPPI T818 and T822

Edge Crush Test

DIN 53149, FEFCO No. 8, ISO 3037, NF Q 03-041, SCAN P33, TAPPI T811 and T824

Flat Crush Test

CPPA D.20, FEFCO No. 6, ISO 3035, NF Q 03-033, SCAN P32, TAPPI 808.

PAT

FEFCO No. 11, TAPPI T821

Net Weight

Model No.

Gross weight

Voltage Single Phase, 220 V, 50Hz

Dimension

Frequency.