• Alat Uji
  • sales@alatuji.com

     

  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

AU - 2018 A Laboratory Valley Beater

 

This instrument is used for laboratory beating of pulp under standardized conditions to determine the behavior of pulp when subject to definite beating schedule. This beater is suitable for routine checking of pulp in laboratory.

Net volume 25 liters of 680 g bone-dry pulp at 2-2.5% concentration.

An amount of the pulp corresponding to 360 gram of OD fiber is taken in a tub is filled with 18 liter water and maintain the temperature as per specified. The lever is released to engaged bed plate and beater roll to beaten. The beaten pulp is a standard specimen for the testing of the physical properties of pulp.

Capacity: 
25 liters of 680 gm bone-dry pulp at 2-2.5% concentration.



Spesification

SPECIFICATIONS

For laboratory beating of pulp under standardized conditions. Motor with V belt drive provided.
MS fabricated tub lined with stainless steel ground and polished.
Beater roll mounted in ball bearings in the tub valves to prevent spring action during beating.
Beater roll and bed plate made of special non-rusting alloy and are readily exchangeable.
Net tub volume 25 litres of 680 g bone dry pulp at 2 - 2.5% concentration.
Motor and V belt provided.

Beater roll

: made of heat treateable stainless steel

Diameter

: 193.8 mm & width 152.4 mm

Beater roll flybar

: Thickness of each flybar is 4.8 mm and with a
  Brinell hardness 350 - 400

Beater roll drum speed

: 500 rpm.

Width of the bed plate

: 159 mm.

Number of bed plate bars

: 7 bars, each 3.2 mm thick set in lead 2.4mm apart
  with a brinell hardness 325-375

Bed Plate diaphgram

: Thickness of 1.6 mm live rubber.

Lever arm

: Casted with dead weight 5.5 Kgs.

Power supply

: 380 V, AC 3 Phase, 1 HP.

Applicable reference standard

: TAPPI 200, SCAN C 25, ISO 5264/1

Accessories
AC induction motor with stainless steel cover for pulley and belt drive.
Stainless steel upper cover with sealing gasket.
Control panel with start stop switches.
Necessary tools Kit set

Shipping Data

Net Weight: 200 Kgs.
Gross weight: 280 Kgs
Dimension

Ordering Data

Model No.
Voltage : 440 V, 3 Phase
Frequency

Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change.

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk AU - 2018 A Laboratory Valley Beater


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji