• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

DC Voltage Data Logger with USB Interface BDV01/02

 

This data logger can measure and store DC Voltage readings automatically. The professional applications can be provided by the PC software DGraphTM. Logger status, alarm indication and low battery indication are via flashing red/green LED and yellow LED. The button on housing can be used to start logging, or confirm and clear LED alarm when LED alarm is hold status.
User can plug data logger straight into PC’s USB port without any cables. Before getting started, user need to install USB driver and DGraphTM software, provided on the CD which is included in product packing box. All the software can run under Windows XP, Vista, 7 or 8(32 bit and 64 bit Versions). User can easily use DGraphTM software to setup sample rate, high/low alarm limit and start/stop method, and download data to PC, etc.. And then user can view, analyse and print the data, or export other file formats(txt, xsl, csv, bmp, jpg).
Especially, for some professional applications, user can set access password, name each channel, enable/disable specified channel, input calibration data for each channel, disable LED indication for saving power, and select sample mode(Instant, Average, Maximum and Minimum), etc


Feature

* Portable, precise, compact and low cost
* Easy to log and analyse data
* Unique and uniform PC software DGraphTM can meet your higher requirements
* Elaborate design make it perfectly work in more application field
* Strict design ensure long term reliable work
* Enhanced electrostatic protection design to prevent unexpected damage
* Each unit have single serial number identified by DGraphTMsoftware to manage data simply
* All data from different data logger and all different measurement parameters can be graphed and analysed together
* USB interface directly communicate with PC for setup and data download
* User can set access password for data logger
* User can name each channel and enable/disable specified channel freely
* LED alarm enable/disable, LED alarm hold enable/ disable and alarm limit settings for all channels via DGraphTM
* User can input formula to customize compound line
* User can create and customize new unit easily and freely
* Logging status indication via red/green LED and battery status indication via yellow LED
* Start logging method: Immediately, Button, Delayed
* User can input two point calibration value for each channel when setup
* Replaceable lithium battery and logged datas are not lost if battery exhausted


Spesification

 

BDV01

BDV02

   

DC Voltage

Measurement range

0 to 30V

0 to 30V

   

Accuracy(Typ.)

±1%±1count

±1%±1count

   

Resolution

0.04V

0.04V

   

LCD

   

√  

   

Memory Capacity

 

64KBytes

64KBytes

   

Sample Rate

 

1sec. to 12hr.

1sec. to 12hr.

   

Start Method

Immediately, Start by button, and Start at date&time

Stop Method

Stop when memory full, overwrite when memory full, stop by button and stop until specified number of sample points finished

Sample Mode

Instant(default), average, maximum and minimum
This will decide how to dispose data at idle time between a sample interval

Button

Software config to start logging bybutton, or clear and reset LED alarm when LED alarm is hold

LED

Red&green LED: Logger Status indication(Include Delay to Start, Logging, Alarm, Finished)
(Sofware can disable this two LED for saving power)
Yellow LED: Low battery indication

Alarm

User programmable high or low alarm limit for each channel(If necessary)
LED alarm and hold

Communication

Direct USB connection
Need to install the driver provided on CD

PC Software

DGraphTM software and USB driver required (Included on CD)
(Compatible with Windows XP, Windows Vista, Windows 7&8(32 bit & 64bit Versions))
Use these software to setup, download, view graph and analyse data

Power Supply

User replaceable 1/2AA 3.6V Lithium Battery 1200mAh
NOTE: USB interface can supply power directly if necessary

Battery Life

Approx. 3 Years @ 1 Minute Sample Rate
NOTE: It also Depends on using of LEDs

Internal Input Impedance

R1+R2=1.1MΩ+91KΩ

Operating Range

0 to 100%RH  -35 to 80?(-31 to 176?)

Storage Range

Recommended: 20 to 60%RH  10 to 50?(50 to 122?)

Case Material

ABS

Dimentions

130mm×37mm×23mm(5.1"×1.5"×0.9")

Weight

Approx. 69 grams(2.43oz)

Standard Compliance

CE

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk DC Voltage Data Logger with USB Interface BDV01/02


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)