• Alat Uji
  • sales@alatuji.com


  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • Sales Alat Pengujian
    0812 9595 7914
    0813 1066 1358
    0878 7867 0721
  • Alat Uji
  • Sales Jasa Pengujian
    0812 1930 1958

i-Thermotek 2400 Heat Seal & Hot Tack Tester


i-Thermotek 2400 Heat Seal & Hot Tack Tester can be used for hot tack test of plastic films, composite films and other packaging materials as well it can be used to measure the heat seal strength of the test specimen rapidly and accurately within a specified period after heating and sealing procedures. Additionally the sealing parameters of the substrate materials of plastic film, flexible composite film, coated paper or other composite films can be determined with certain sealing speed, sealing pressure and at three different sealing temperatures in one single test. Since the melting point, thermo-stability, fluidity or thickness of the materials are different, they show great difference in the sealing parameters. With i-Thermotek 2400 Heat Seal & Hot Tack Tester, the optimal sealing parameters can be obtained accurately and rapidly.




  • With the digital P.I.D. temperature control system, the preset temperature can be reached in a short period without fluctuations.
  • Wide range of temperature, pressure and dwell time can meet various testing requirements.
  • The test can be started manually or by pedal switch, which is convenient to operate. The anti-scald design can guarantee the safety of the operator.
  • Three groups of tests with two distinct specimens can be performed each time, which improves the testing efficiency.
  • The temperatures of the upper and lower sealing jaws can be controlled independently, which can meet the requirements for different test conditions.
  • Hot tack test can be performed, which can meet the special requirements of the users.
  • The test results can be evaluated with support of professional software.




  • Embedded computer controlled system provides safer and more reliable data management as well as test operation.
  • The instrument can be easily operated with a mouse, a keyboard, and a monitor, without requiring a PC.
  • The instrument is equipped with four USB ports and dual Internet ports for convenient data transmission




  • Windows-based operating interface, which is easy to learn and operate for the beginner.
  • Test data can be stored in various formats, which is convenient for data transfer.
  • Historical data can be searched, analyzed and printed conveniently.



Technical Specifications

Heat Seal TestSealing Temperature Room temperature~250 °C
Sealing Pressure 0.05 MPa~0.7 MPa
Dwell Time ≤99.9s
Resolution ±0.1°C
Accuracy ±2°C
Temperature Gradient ≤20°C
Sealing Area 55mm×10mm
Number of Sealing Jaws 3+1Note1
Hot Tack TestSealing Temperature Room Temperature~250°C
Resolution ±0.1°C
Accuracy ±1°C
Dwell Time (Heat Seal) ≤99.9s
Dwell Time (Hot Tack) ≤20s
Sealing Pressure 0.05~0.7MPa
Number of Sealing Jaws 1?1Note2
Capacity Range 0~50N (Optional)
Test Accuracy 1% FS
Resolution 0.1N
Specimen Width 15 mm or 25 mm or 25.4 mm
Heat Seal StrengthCapacity Range 0~50N (Optional)
Test Accuracy 1% FS
Resolution 0.1N
Specimen Width 15 mm or 25 mm or 25.4 mm
Speed 200mm/min,250mm/min,300mm/min (Customization is available)
Stroke 78.5 mm
OthersGas Supply Air (Outside of supply scope)
Gas Supply Pressure 0.05~0.7MPa
Port Size Φ6 mm PU Tubing
Dimension 500 mm (L) × 580 mm (W) × 575 mm (H)
Power Supply AC220V 50Hz/AC120V 60HzNote3
Net Weight 50 kg
Instrument (Including wireless data interface?, Embedded Software, Standard LCD Monitor, Keyboard, Mouse, Calibration Frame, Pedal Switch, Sample Cutter and Valve tubing Set, Printer
Optional Strip Sample Cutter, Unheated Sealing Jaw, Air Compressor and Desiccant


Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :


Tidak ada video untuk produk ini


Download PDF

Artikel Terkait dengan Produk i-Thermotek 2400 Heat Seal & Hot Tack Tester





Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)


Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)


Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)


Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji