• Alat Uji
  • sales@alatuji.com

     

  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

 

Fully automatic surface inspection of painted automobile attachments

 

A perfectly painted surface is every car's staple feature. Thus the quality requirements for painted parts attached to the car body are the same as with the body itself. Objective inspection is possible with the reflectCONTROL PSS 8005.D robot-assisted inspection system for large and complex attachments such as bumpers. The defects are measured laterally and in depth and classified on the basis of catalogues and optionally marked during robot-based inspection with the automationCONTROL 8005 PSS 8005.M system using ATENSOR-LS1 technology*. This way, follow-up work and process improvements can be performed precisely as required and easily.

 

Benefits:

  • Objective 100% inspection of all vehicles manufactured
  • Employees can concentrate on remedying critical defects and not on identifying them
  • Detection of defects immediately after the painting booth, when they can still be easily reworked
  • Cutting costs by reducing defects
  • Reducing the number of rework lines

 

Material parameters:

  • Defect sizes of from 10 µm, lateral
  • Local 3D-reconstruction allows the automation of follow-up work
  • Detection rate that is practically independent of colour
  • Not dependent on the robot type

 

*ATENSOR LS1 technology = robotic process automation for products with a high number of versions, which makes manual robot programming impossible. With the ATENSOR-LS1 (LS1 = lot size 1), robot programmes are dynamically generated on the basis of measurements. The programmes are then loaded and run in the robot memory.
 

NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji