Mengenal Alat Simulator Yang Banyak Digunakan di Universitas

Simulator adalah alat yang digunakan sebagai pelatihan yang meragakan sesuatu dalam bentuk tiruan yang mirip dengan keadaan sesungguhnya. Penggunaan alat simulator banyak kita temui di tempat-tempat pelayanan khusus seperti simulator mengendalikan pesawat, simulator fisika, simulator biologi dll. Berikut ini simulator yang sering digunakan di universitas seperti simulator fisika dan masih banyak lainnya lagi. Berikut mengenal produk Edibon Simulator yang digunakan di universitas.

 

Edibon adalah perusahaan ternama yang membuat dan mengembangkan alat peraga, pendidikan dan simulator yang di peruntukan untuk pendidikan seperti sekolah ataupun universitas. Alatuji telah bekerja sama dengan beberapa perusahaan guna menyuplai alat simulator yang digunakan di beberapa industri dan universitas di Indonesia.

 

PHYSICS / FISIKA

Simulator ini digunakan di Universitas dengan jurusan Fisika atau yang berhubungan dengan Fisika. Simulator ini dengan tipe sebagai berikut:

EFAC/CIB. Control Interface Box

• Control interface box with process diagram in the front panel and with the same distribution that the different elements located in the unit, for an easy understanding by the student.
• All sensors, with its respective signals, are properly manipulated for -10 to +10V computer output.
• Sensors connectors in the interface have different pines numbers (from 2 to 16), to avoid connection errors. Single cable between the control interface box and computer.
• The unit control elements are permanently computer controlled, without need of changes or connections during the whole process test procedure.
• Shield and filtered signals to avoid external interferences.
• Conventional mechanical and electrical protection systems, and also, computer protection and in a simultaneous way.

 

ELECTRONICS / ELEKTRONIK

EBC-100. Base Unit, with built-in power supply.

Hardware support and power supply.

Modules supporting unit.

Fixed outputs DC: + 5V, + 12V, -12V.

Variable outputs DC: ± 12 V.

AC output: 12 V. or 24 V.

Outputs through either 2mm. contact terminals, or through 25 pin Sub-D connector.

LED’s voltage indicators.

Robust construction.

Supply: 110/220 V. AC.

Frequency: 50/60 Hz.

EBC-100 includes all the requirements for full working with any module from M1 to M99.

Dimensions: 410 x 298 x 107 mm. approx. (16.1 x 11.7 x 4.2 inches approx.).

Weight: 2 Kg. approx. (4.4 pounds approx.).

 

COMMUNICATIONS / KOMUNIKASI

Computer Controlled Microwave Trainer

 

• Open Control + Multicontrol + Real-Time Control.
• Specialized EDIBON Control Software based on LabView.
• Projector and/or electronic whiteboard compatibility allows the unit to be explained and demonstrated to an entire class at one time.
• Capable of doing applied research, training courses, etc.
• Remote operation and control by the user and remote control for EDIBON technical support, are always included.
• Totally safe, utilizing 4 safety systems (Mechanical, Electrical, Electronic & Software).
• Designed and manufactured under several quality standards.
• Optional ICAI software to create, edit and carry out practical exercises, tests, exams, calculations, etc. Apart from monitoring user’s knowledge and progress reached.
• This unit has been designed for future expansion and integration. A common expansion is the EDIBON Scada-Net (ESN) System which enables multiple students to simultaneously operate many units in a network.

 

ELECTRICITY / LISTRIK

 Computer Controlled Photovoltaic Solar Energy Unit

• Advanced Real-Time SCADA.
• Open Control + Multicontrol + Real-Time Control.
• Specialized EDIBON Control Software based on LabVIEW.
• National Instruments Data Acquisition board (250 KS/s, kilo samples per second).
• Calibration exercises, which are included, teach the user how to calibrate a sensor and the importance of checking the accuracy of the sensors before taking measurements.
• Projector and/or electronic whiteboard compatibility allows the unit to be explained and demonstrated to an entire class at one time.
• Capable of doing applied research, real industrial simulation, training courses, etc.
• Remote operation and control by the user and remote control for EDIBON technical support, are always included.
• Totally safe, utilizing 4 safety systems (Mechanical, Electrical, Electronic & Software).
• Designed and manufactured under several quality standards.
• Optional ICAI software to create, edit and carry out practical exercises, tests, exams, calculations, etc. Apart from monitoring users knowledge and progress reached.
• This unit has been designed for future expansion and integration. A common expansion is the EDIBON Scada-Net (ESN) System which enables multiple students to simultaneously operate many units in a network

 

 MECHATRONICS

Air Flow Temperature Control Module

• Advanced Real-Time SCADA and PID Control.
• Open Control + Multicontrol + Real-Time Control.
• Specialized EDIBON Control Software based on LabVIEW.
• National Instruments Data Acquisition board (250 KS/s, kilo samples per second).
• Projector and/or electronic whiteboard compatibility allows the unit to be explained and demonstrated to an entire class at one time.
• Capable of doing applied research, real industrial simulation, training courses, etc.
• Remote operation and control by the user and remote control for EDIBON technical support, are always included.
• Totally safe, utilizing 4 safety systems (Mechanical, Electrical, Electronic & Software).
• Designed and manufactured under several quality standards.
• Optional ICAI software to create, edit and carry out practical exercises, tests, exams, calculations, etc.
• Apart from monitoring users knowledge and progress reached.
• This unit has been designed for future expansion and integration. A common expansion is the EDIBON Scada-Net (ESN) System which enables multiple students to simultaneously operate many units in a network.