Tachometer | A2108
Tachometer with Analog Output
2 Models
A2108: Basic Model with Voltmeter Plugs
A210/LSR: Adds laser light source and BNC Cable
The A2108 Non-Contact Tachometer converts RPM into an analog (voltage) output signal allowing you to use any Digital Multimeter, Data Acquisition System or Voltage Recorder as an RPM display. Optional Contact adapter allows you to measure contact RPM or surface speed.
The voltage output on the A2108/LSR Analogue Output version provides 1mv/rev = 6vdc @ 6000 rpm.
The A2108/LSR version is switched On manually, using the continuous mode feature. option, provided continuous measurement is taking place the Probe will remain in the ON mode. An Auto OFF feature provides shutdown if no activity is logged for 1 minute.
Spesification
Speed ranges(A2108 / A2108/LSR) Range I. Range II. |
100 - 6000 RPM 1000 - 60,000 RPM |
Resolution(A2108 / A2108/LSR) | +/- 1.5mV, +/- 1 rpm |
Accuracy(A2108 / A2108/LSR) | +/- 0.5% (of indicated) |
Optical Range(A2108) A2108/LSR | 50 - 1000mm Up to 2m (6ft) |
Optical angle(A2108) A2108/LSR | +/- 45 deg. +/- 80 Degrees |
Light Source(A2108) A2108/LSR | Tungsten Filament Laser Class II 635nm |
Range select | Up Arrow = I. Down arrow = II. |
Carry Case | Included |
Contact Adapter | Optional |
Voltage Output | -6 vdc Both Ranges |
On Target ind. | Green LED |
Power | 4 x AAA batteries - supplied |
Connections A2108, A2108/LSR | Coiled cable with 2 x 4mm plugs fitted Binder connector + 1m cable |
Mounting(A2108/LSR) | Camera bush fitted |
Zero offset(A2108/LSR) | Max. 6mV Analogue version |
Update time(A2108/LSR) | Time of one rev or 1millisecond |
Controls(A2108/LSR) | 2 x Press to Measure buttons One Continuous Mode button |
Sensing Distance | 1 meter (39 inches) |
Battery Type | Alkaline AA (rechargeable type can be used) |
Battery Life | 6 hours continuous (shorter when using rechargeable type) |
Display Update Rate | 0.8 seconds/update (0.1 sec for Max Value capture) |
Warranty | 2 Years |
Inquiry
Video
Tidak ada video untuk produk ini