Water Level and Temperature Data Loggers OM-CP-LEVEL1000

Feature

The OM-CP-LEVEL1000 accurately monitors and records water level and temperature. Its rugged, stainless steel design allows for the device to be placed in harsh environments, which makes it well suited for use at waste water treatment facilities, monitoring well and ground water levels, irrigation canals, lake and wetland studies and other water level applications. The integrated vented tube allows the device to be atmospheric pressure compensated, providing improved accuracy and resolution over other, non-vented water level recorders.

 

The OM-CP-LEVEL1000 uses a rugged stainless steel pressure strain gauge to accurately measure the water level. Our user-friendly software will display all pressure measurements in the user’s choice of feet, inches, meters, centimeters, millimeters or PSI. The device uses an internal temperature sensor to provide accurate temperature measurements eliminating the need for a separate temperature recorder. The logger can be started to take measurements every two seconds for rapid changes in water level, up to one reading every twelve hours.

 

The OM-CP-LEVEL1000 has the ability to record up to 16,383 readings and store it in its non-volatile memory. Its small size allows it to fit almost anywhere. Data retrieval is simple. Plug it into an empty USB port and the easy to use Windows software does the rest. The software converts your PC into a real time strip chart recorder. Data can be printed in graphical or tabular format and can also be exported to a text or Microsoft Excel.

Spesification

Temperature Sensor: Semiconductor
Temperature Range: -40 to 80°C (-40 to 176°F)
Temperature Resolution: 0.1°C
Calibrated Accuracy: ±0.5°C (0 to 50°C)

Pressure Sensor: Semiconductor strain gage
Media Compatibility: Must be compatible with 303 stainless steel
Level Nominal Range: 0 to 30'
Resolution: 0.02"
Pressure Accuracy: Nominal range ±0.3% max @ 25°C
Response Time: 90% change in 1 ms
Repeatability: ±0.5% FSR; ±0.2% typical
Proof Pressure: 45 psig
Burst Pressure: 75 psig
Desiccant: Indicating silica gel inside communications end cap with viewing windows (blue = dry; pink = saturated).
Desiccant Life: 7 days @ 99% RH; (can be generated by heating canister @ 350°F for 1 hour)

 

GENERAL SPECIFICATIONS

Memory: 16,383 readings per channel; 32,766 total readings
Reading Rate: 1 reading every 2 seconds to 1 every 12 hours
Start Modes: software programmable immediate start or delay start up to six months in advance
Real Time Recording: May be used with PC to monitor and record data in real time
Calibration: Digital calibration is available through software
Calibration Date: Automatically recorded with device
Battery Type: 3.6 V lithium battery included; user replaceable
Battery Life: 1 year typical at 25°C
Data Format: Date and time stamped, °C, °F, °K, °R; PSI, inches, feet, millimeters, centimeters, meters of water column),
Time Accuracy: ± minute per month when RS-232 port is not in use
Computer Interface: PC serial or USB (interface cable required); 2400 baud
Software: XP SP3/Vista and 7 (32 and 64-bit)
Operating Environment: -40 to 80°C (-40 to 176°F) 0 to 100% RH
 

Dimensions:
  Submersible End:
  232 mm dia x 32 mm L
  (9.1 x 1.25")
  Communications End:
  181 mm dia x 31 mm L
  (7.1 x 1.2"), plus cable

Weight: 3 lb (1.4 kg)