Marine Moisture Meter | Tramex Skipper Plus

Feature

• Non-destructive detection and measurement of moisture in wooden boats, GRP (Glass Reinforced Plastic) boat hulls, wooden parts, components, decks etc.

• External rubber electrodes in direct contact with material being tested for best sensitivity, repeatability and greater depth of signal penetration.

• Wide range of readings for wood of 5 to 30% on hard wood scale and 0 to 100 on comparative scale for GRP and other materials.

• Large, clear, easy to read display giving meaningful readings

• Automatic power cutoff switches "Off" when not in use to save Battery

• Confirm if wooden boats are dry before painting or varnishing

• Early detection before blistering appears

• Trace deck and bulkhead leaks

• Identify extent of moisture affected area

• bluedot Deep signal penetration to detect elevated moisture through most covering and coating materials and deep core of composite hulls without having to damage or puncture the material being tested.

• Hold function enables user to "freeze" the reading, useful when taking readings in awkward places where the meter face may not be visible.

• Three measurement ranges optimized for testing of different materials such as hardwood, GRP and surface moisture.

• High moisture audio warning tone that can be switched on or off

• Identify the presence of moisture osmosis in fiberglass hulls

• Check if racing boats are carrying excess moisture weight

• Monitor hull during dehumidification

• Check stripped areas prior to re-coating

Spesification