• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

AU - 1004 C THICKNESS MICROMETER (Motorised Dial Type)

 

Used for rapid and accurate measurement of thickness of paper, board and plastics. Both Models are compact ones and measure thickness of paper, board, plastic films, rapidly and accurately. Measuring spindle with constant lowering speed (1mm/sec). 

Motorized Dial Type single push-button operation for lowering spindle speed.

  • With Resolution 0.01mm.
  • With Resolution 0.001mm



Spesification

SPECIFICATIONS

Measuring spindle with constant lowering speed (1 mm/sec)

Model D: Manually Operated and lowering of spindle hydraulically controlled.

Hardened and lapped measuring face.

Provided with dial type indicator.

Test area

: 2 cm2

(This means that the pressure applied by the weight shall be about 2 Kg.)

Steady Pressure

: 1 Kg/cm2 (98.0 Kpa)

Throat Depth

: Throat Depth

Measuring Range

: 0-20 mm with dial indicator resolution .01mm.

Dead weight load

: Fixed.

Lowering Speed

: Fixed, Controlled

Applicable Standards

: TAPPI T 426 M-46
  FEFCO 

No

. 3
  SCAN P 31

Option:
Double sided adhesive paper tape
Sample Cutter Die Punch Type 12.7 mm X 152.4 mm
With Digital Temp. indicator cum controller
Other flutes type
APPLICABLE STANDARD
TAPPI 809, SCAN P 27, ISO 7263
 

Shipping Data

Ordering Data

 

Net Weight

Model No.

 

Gross weight

Voltage

 

Dimension

Frequency

Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk AU - 1004 C THICKNESS MICROMETER (Motorised Dial Type)


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji