AU - 1007 A Folding Endurance Tester (Kohler Molin Type)
A test piece is fastened vertically between two clamps. The upper clamp folds, the test piece by means of the reciprocating circular motion while the lower clamp maintain it under a given load. For determining thefolding endurance of all kinds of paper, paperboard, foils and films with a standard folding speed per minute. Kohler Molin Type with Five Figure counter - Loading clamps of dead weight type, giving standard load of 800 gm, during the test. With Five-Figure impulse Counter having hold and zero setting.
Extra Optional:
- As above model With Micro controller Digital Counter having hold and zero setting.
- Die & punch strip cutter 15x100 mm for specimen
Spesification
SPECIFICATIONS
Two specimen can be tested simultaneously. The number of folds is registered by two counters which are stopped automatically, when the specimen breaks.
Folding clamps quick grip type for a strip width of 15 mm.
Vibration free run of folding clamp, due to the absence, of a conventional geared drive.
Fix jaws having Loading clamps of with weight bars and dead weights steps of 50 g give loads between 1.96 and 9.32 N. Standard load according to SCAN and ISO is 7.85 N (corresponding to a weight of 800 g)
Display |
: Impulse Counter with Five figure and zero setting. |
Folding angle |
: 312o.. |
Folding speed |
: 200 ± 10 double folds/min. |
Dimensions of Test Strip |
: 15 X 100 mm. |
Applicable standard |
: SCAN P |
Sample Cutter
Digital model microprocesser based counter.
Shipping Data |
Ordering Data |
|
Net Weight |
Model No. |
|
Gross weight |
Voltage |
|
Dimension |
Frequency |
Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change
Inquiry
Video
Tidak ada video untuk produk ini