• sales@alatuji.com


  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

AU - 1007 B Folding Endurance Tester (Schopper Type)


Schopper Type instrument with Five Figure impulse Counter - Loading clamps of spring type giving standard load of 1000 gm during the test. With Five-Figure impulse Counter having hold and zero setting. Two horizontally opposed and movable clamping jaws, which hold specimen 100 mm (4 inches) long under variable tension during the folding cycle, while a slotted folding blade, sliding back and forth between four creasing rollers, folds the paper at 120 double folds per minute

One complete oscillation of the test piece, during which it is folded first back wards and then forwards about the same line and this oscillation is double fold. 

The Equipment is used for determining the Folding Endurance of all kinds of paper, foil and films upto 0.25 mm or less.

Extra Optional: 

Die & punch strip cutter 15x100 mm for specimen. 



Folding Endurance Tests have been used for the estimation for the suitability of the paper in use to withstand repeated bending, folding, and creasing.

Two specimen can be tested simultaneously. The number of folds is registered by two six figure impluse counters with hold facilities when the respective head stopped automatically upon the rupture of first specimen and automatic switched off the instruments upon the rupture of second specimen.

Front Panel consist of start, stop, push button, with light indicator which indicate the on/off position of electric motor. A /aluminium sheet cover to protect it from dirt.

Working Unit

: Two speartely working folding units for quicker    test.

Testing of Paper

: 0.25 mm thickness of paper

Specimen width

: 15 mm

specimen length

: 98 mm

Clamping length

: 90 mm

Stretching force

: Maximum 9.81 N and Minimum 7.55 N

Folding Roll Diameter

: 6 mm

Distance Between folding rolls

: 0.5 mm

Working speed

: 120 strokes / min.

Deflection on either side

: 10 mm.

Power Supply

: 1 Phase, 220 ± 10% V AC, 50 Hz.

Applicable standard

: TAPPI T 423 ISO 5626, IS:1060 (Part-I)

Test Strip Cutter for specimen 
 15 X 100 mm.

Shipping Data

Ordering Data


Net Weight

Model No.


Gross weight





UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change


Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :


Tidak ada video untuk produk ini


Artikel Terkait dengan Produk AU - 1007 B Folding Endurance Tester (Schopper Type)





Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)


Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)


Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)


Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji