Compressed Air Flow Meter - T-CDI-5400-20S
The T-CDI-5400-20S is a flowmeter for compressed air systems. It measures flow by maintaining one probe warmer than the other. It calculates the mass velocity from the amount of heat required, and then calculates the flow on the basis of pipe area. This model fits 2" steel pipes.
Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 logger. When using a U12 logger, this sensor requires a 4-20mA input cable (CABLE-4-20mA).
Feature
- This adds the ability for users to be able to measure compressed air flow (SCFM).
- Easy to install
- Digital display
Spesification
Measurement range, 5200 model
1 - 80 SCFMMeasurement range, 5400 model3 - 350 SCFM (calibrated), 350 - 600 (uncalibrated)MediumCompressed air, nitrogenOperating pressure, 5200 model30 to 170 psig for best accuracy. 200 psig max on Sch 40 steelOperating pressure, 5400 model200 psig max on Sch 40 steelInput power250 mA @ 18 - 24 VDCOutput resistance400Ω maxResponse time1 sec to 63% of final valueOutputselectable 4 - 20mA or pulseDisplay4-digit LED
Inquiry
Video
Tidak ada video untuk produk ini