HOBO MX800 Series Water Data Loggers
HOBO Water Data Loggers MX800 bekerja dengan sensor yang dapat diganti-ganti untuk memberikan solusi yang sangat dapat dikonfigurasi untuk memantau konduktivitas/salinitas air, suhu, dan tingkat air. Tersedia dalam model yang mudah dipasang dan sepenuhnya dapat tenggelam (MX801) serta model baca langsung (MX802) untuk pengambilan data yang nyaman tanpa perlu mengeluarkan sensor dari dalam air.
Feature
- Kompatibel dengan sensor Konduktivitas, CTD (konduktivitas/suhu/kedalaman), dan DO (oksigen terlarut) yang dapat diganti-ganti (dijual terpisah) - ganti sensor untuk berbagai aplikasi.
- Dilengkapi dengan Bluetooth, untuk konfigurasi logger yang mudah dan pengambilan data.
- Mudah dipasang, sepenuhnya dapat tenggelam (MX801) atau langsung dibaca untuk pengambilan data yang nyaman (MX802).
- Diameter logger kurang dari 2 inci.
- Pengambilan data lebih cepat melalui Bluetooth 5.0.
- Fitur pendeteksi air menunjukkan kapan logger berada di luar air (MX801).
- Termasuk sensor tekanan barometrik (MX802).
- Hubungkan dua sensor ke satu logger untuk mendapatkan pengukuran seperti DO yang disesuaikan dengan salinitas langsung, tanpa perlu pengolahan data tambahan.
- Kalibrasi terpandu memastikan data yang akurat. Baterai dapat diganti oleh pengguna.
Spesification
Conductivity Measurements
- Measurement Range
-
Electrical conductivity and specific conductance: 0 to 100,000 µS/cmSalinity using PSS-78: 2 to 42 PSUTotal Dissolved Solids (TDS): 0 to 100,000 mg/L
- Calibrated Range
-
Electrical conductivity: 50 to 80,000 µS/cm5 to 35C41 to 95F
- Accuracy
-
Conductivity: +/-2% or 15 µS/cm whichever is greaterSalinity: +/-2% of reading or 0.1 PSU, whichever is greater
- Resolution
-
Conductivity0.1 µS/cm from 0 to 1,000 µS/cm | 1 µS/cm from 1,000 to 10,000 µS/cm | 10 µS/cm from 10,000 to 100,000 µS/cmSalinity: 0.01 PSUTDS: 0.1 mg/L
- Response Time
-
1 second to 90% at a stable temperature
Absolute Pressure and Water Level Measurements W-CTD-01
- Range
-
0 to 207 kPa (0 to 30 psia); approximately 0 to 9 m (0 to 30 ft) of water depth at sea level, or 0 to 12 m (0 to 40 ft) of water at 3,000 m (10,000 ft) of altitude
- Factory Calibrated Range
-
69 to 207 kPa (10 to 30 psia), 0° to 40°C (32° to 104°F)
- Burst Pressure
-
310 kPa (45 psia) or 18 m (60 ft) depth
- Water Level Accuracy*
-
Typical error: ±0.05% FS, 0.5 cm (0.015 ft) waterMaximum error: ±0.1% FS, 1.0 cm (0.03 ft) water
- Raw Pressure Accuracy**
-
±0.3% FS, 0.62 kPa (0.09 psi) maximum error
- Resolution
-
<0.02 kPa (0.003 psi), 0.21 cm (0.007 ft) water
- Pressure Response Time***
-
<1 second to 90% at a stable temperature
Absolute Pressure and Water Level Measurements W-CTD-02
- Range
-
0 to 400 kPa (0 to 58 psia); approximately 0 to 30.6 m (0 to 100 ft) of water depth at sea level, or 0 to 33.6 m (0 to 111 ft) of water at 3,000 m (10,000 ft) of altitude
- Factory Calibrated Range
-
69 to 207 kPa (10 to 30 psia), 0° to 40°C (32° to 104°F)
- Burst Pressure
-
310 kPa (45 psia) or 18 m (60 ft) depth
- Water Level Accuracy*
-
Typical error: ±0.05% FS, 0.5 cm (0.015 ft) waterMaximum error: ±0.1% FS, 1.0 cm (0.03 ft) water
- Raw Pressure Accuracy**
-
±0.3% FS, 0.62 kPa (0.09 psi) maximum error
- Resolution
-
<0.02 kPa (0.003 psi), 0.21 cm (0.007 ft) water
- Pressure Response Time***
-
<1 second to 90% at a stable temperature
Absolute Pressure and Water Level Measurements W-CTD-03
- Range
-
0 to 850 kPa (0 to 123.3 psia); approximately 0 to 76.5 m (0 to 251 ft) of water depth at sea level, or 0 to 79.5 m (0 to 262 ft) of water at 3,000 m (10,000 ft) of altitude
- Factory Calibrated Range
-
69 to 850 kPa (10 to 123.3 psia), 0° to 40°C (32° to 104°F)
- Burst Pressure
-
1,200 kPa (174 psia) or 112 m (368 ft) depth
- Water Level Accuracy*
-
Typical error: ±0.05% FS, 3.8 cm (0.125 ft) waterMaximum error: ±0.1% FS, 7.6 cm (0.25 ft) water
- Raw Pressure Accuracy**
-
±0.3% FS, 2.55 kPa (0.37 psi) maximum error
- Resolution
-
<0.085 kPa (0.012 psi), 0.87 cm (0.028 ft) water
- Pressure Response Time***
-
<1 second to 90% at a stable temperature
Absolute Pressure and Water Level Measurements W-CTD-04
- Range
-
0 to 145 kPa (0 to 21 psia); approximately 0 to 4 m (0 to 13 ft) of water depth at sea level, or 0 to 7 m (0 to 23 ft) of water at 3,000 m (10,000 ft) of altitude
- Factory Calibrated Range
-
69 to 145 kPa (10 to 21 psia), 0° to 40°C (32° to 104°F)
- Burst Pressure
-
310 kPa (45 psia) or 18 m (60 ft) depth
- Water Level Accuracy*
-
Typical error: ±0.075% FS, 0.3 cm (0.01 ft) waterMaximum error: ±0.15% FS, 0.6 cm (0.02 ft) water
- Raw Pressure Accuracy**
-
±0.3% FS, 0.43 kPa (0.063 psi) maximum error
- Resolution
-
<0.014 kPa (0.002 psi), 0.14 cm (0.005 ft) water
- Pressure Response Time***
-
<1 second to 90% at a stable temperature
Temperature Measurements (All Models)
- Range
-
-20° to 50°C (-40° to 122°F), non-freezing water
- Accuracy
-
±0.15°C (±0.27°F) from 0° to 50°C (32° to 122°F)
- Resolution
-
0.01°C at 25°C (0.018°F at 77°F)
- Response Time
-
3 minutes to 90% in water (typical)
- Drift
-
3 minutes to 90% in water (typical)
Sensor
- Dimensions
-
2.5 cm (1 inch) diameter, 15 cm (6 inches) length
- Weight
-
Approximately xx g (xx oz) in air; approximately xx g (xx oz) in saltwater
- Wetted Materials
-
Passivated 316 Stainless steel housing rated for use in saltwater, Viton and Buna-N O-rings, PET sensor connectorDepth sensor: ceramicConductivity sensor: PET, platinum plating on electrodesNote: Sensor should be mounted so that it is not in contact with other metalsIP68; Waterproof to pressure sensor burst pressure rating
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). |
The UKCA marking identifies this product as complying with all relevant directives in the UK Declaration of Conformity. |
* Water Level Accuracy: With accurate reference water level measurement, known water density, and a stable temperature environment. System Water Level Accuracy equals the sum of the Barometric Water Level Accuracy plus the selected CTD sensor Water Level Accuracy. ** Raw Pressure Accuracy: Absolute pressure sensor accuracy includes all sensor drift, temperature, and hysteresis-induced errors. *** Changes in Temperature: Allow 20 minutes in water to achieve full temperature compensation of the pressure sensor. There can be up to 0.5% of additional error due to rapid temperature changes.
Inquiry
Video
Tidak ada video untuk produk ini
Testimoni
Download PDF
Tidak ada file catalog untuk produk ini