• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

AU - 1029 Internal Plybond Tester

 

Designed for determining the Internal Bonding Strength of Paper, Paperboard and Laminates, by measuring the average energy, in thousands of foot pound required to delaminate the specimen in two piles, as described reference standard TAPPI T-569. 

Dual capacity pendulum of 0-0.25 FT/LB and 0.1-0.5 FT/LB. Readings directly on calibrated scale. The five number specimen preparation unit, which will allow for variations of specimen thicknesses, with different clamping pressures on the specimen from 50 to 200 PSI.

Standard calibration sliding weight with sample holder. 

Double side adhesive tape width 1”.



Spesification

SPECIFICATIONS

Made of Heavy cast iron base with built-in levelling device pressure sensitive tape dispenser integral with base and 

L

 shape sample holder.

 

A Stationary Anvil and separable platen which the pendulum strike at the same point for each test.

Sample Size : 1” x 1”
Measuring range : 0-0.25 Ft/lb
  0-1.05 Ft/lb 
Clamping pressure : 50 to 200 PSI

A pendulum of dual capacity and free to swing on ball bearing in dust proof bearing assembly. The range changing weights are available to select the pendulum capacity.

A mechanism for holding the pendulum in raised position with a provision instantaneous release.

A plexiglass peak pointer to register the maximum arc, enough which the pendulum swings when release.

The scale is calibrated in thousands of a foot pound in both ranges, with a reference point for calibrating the pointer in free swing to compensate for friction during swing.

The five number specimen preparation unit, which will allow for variations of specimen thicknesses, with different clamping pressures on the specimen from 50 to 200 PSI in 50 PSI increments with provided spacer rings.

APPLICABLE STANDARD
T 569 pm-00 and other related T 833 pm-94
OPTIONS
Standard calibration sliding weight with sample holder.
Double side adhesive tape width 1”.

Changes:
UEC products undergo continuous development. The technical data in this catalogue are therefore subject to change

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk AU - 1029 Internal Plybond Tester


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)