• Alat Uji
  • sales@alatuji.com

     

  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

Inspecting Tube Ends

 

All NDT test methods have some limitation in regard to testing to the very end of a tube. These “untested
ends” must be cut off, resulting in a substantial loss of product and revenue, or the manufacturer needs to
develop a method to test these ends to meet the tube integrity requirement. Some industries require that the
end be tested to a higher level of integrity because it is being expanded, threaded, or welded in the field,
and end integrity is critical to the tube performance. MAC’s new UT End Tester provides a solution to this
problem.

 

MAC’s Echomac FD-5 electronics provide the
critical software for controlling the transducers
and receiving, adjusting, analyzing, and
reporting the test results.

 

The Echomac® UT End Tester consists of two
independent, identical test stations designed to
inspect the untested portion of a tube end.
Generally this portion would range between 250
and 500mm from the tube end, depending on the


Feature

  • Fulfills API 5CT & 5L
  • Detects ID & OD longitudinal and transverse notches down to 5% of the tube wall
  • Detects lamination 6.2mm FBH
  • Measures wall thickness
  • Innovative Automated Pitch Control
  • Unique end plug cone follows unstraight tube ends

Spesification

  • Fulfills API 5CT & 5L
  • Detects ID & OD longitudinal and transverse notches down to 5% of the tube wall
  • Detects lamination 6.2mm FBH
  • Measures wall thickness
  • Innovative Automated Pitch Control
  • Unique end plug cone follows unstraight tube ends

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk Inspecting Tube Ends


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji