• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914
    0813 1066 1358
    0878 7867 0721

VAC-V1 Gas Permeability Tester

 

VAC-V1 is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, composite films, high barrier materials, sheeting, metal foils, rubber, tires and permeable membranes.


Feature

 

  • Gas transmission rate, solubility coefficient, diffusion coefficient, and permeability coefficient of the specimen could be obtained at one operation
  • The instrument comes with two test modes: proportional mode and standard mode
  • Test range could be extended based on user requirements to test materials with high permeability
  • High precision temperature control to meet different test conditions
  • Test results could be easily obtained even at extreme condition by data fitting function, which could work at any temperature
  • The instrument could be used to test poisonous, inflammable, and explosive gases (customization required)
  • The instrument is controlled by computer and test process is automatic
  • Reference film for fast calibration to ensure accurate and universal test data
  • Fast-access calibration ports for temperature and humidity, and standard RS232 port for convenient calibration and data transfer
  • Supports LystemTM Lab Data Sharing System for uniform management of test results and test reports

 

 


Spesification

Technical Specifications

SpecificationsFilm Test
Test Range 0.1~100,000 cm3/m2·24h·0.1MPa (standard volume)
At least 600,000 cm3/m2·24h·0.1MPa (extended volume)
Number of Specimens 1
Vacuum Resolution 0.1 Pa
Vacuum Degree of Test Chamber  
Temperature Room temperature~50°C
Accuracy ±0.1°C
Specimen Size Φ97 mm
Test Area 38.48 cm2 (Φ70 mm)
Test Gas O2, N2 and CO2 (outside of supply scope)
Test Pressure -0.1 MPa~+0.1 MPa (standard)
Gas Supply Pressure 0.4 MPa~0.6 MPa
Port Size Φ6 mm PU Tubing
Instrument Dimension 680 mm (L) x 565 mm (W) x 550 mm (H)
Power Supply AC 220V 50Hz
Net Weight 130 kg

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Testimoni


Artikel Terkait dengan Produk VAC-V1 Gas Permeability Tester


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)