Fully automated, robot-based painting of complex parts with ATENSOR LS1 technology
Robot programmes are created offline for parts that need to be painted. In the process, the parts fixed to hangers are identified by automationCONTROL LPS 8005.T, and their position is determined. The corresponding robot programme is then called up and the component's position and orientation are automatically adjusted. Finally, the modified programme is run by the painting robot.
Benefits:
- Individual robotic painting for objects on the hanger
- Objects are detected automatically and correctly processed
- Processing quality in every position is optimised by specialists
- For new components, painting by robots with standard parameters is possible
Material parameters:
- Object sizes from 0.1 m to 10 m
- Optimised cycle times by means of special algorithms
- Other applications supported: cleaning, sand-blasting
*ATENSOR LS1 technology = robotic process automation for products with a high number of versions, which makes manual robot programming impossible. With the ATENSOR-LS1 (LS1 = lot size 1), robot programmes are dynamically generated on the basis of measurements. The programmes are then loaded and run in the robot memory.