• 021 8690 6777
    021 8690 6771_
  • 0816 1740 8927
    0817 6700 726
  • Pin: 2856BC08
    New PIN : 5A357BF9
  • 0816 1740 8925
    0812 8006 9024
    0812 9595 7914

  • 0813 1066 1358

  • sales@alatuji.com

     


Oken type smoothness and air-permeability tester (water column type )

 

This machine has its characteristic in using a 500 mm water column air manometer to measure airflow between the surface of a specimen and the standard surface, with certain conditions, while Bekk type smoothness tester depends on the measurement of time that is needed to inflow a certain amount of air. The standard surface is constituted of multiple concentric rings,and the air of 500 mm water column-adjusted low pressure is let to flow between the standard surface and the specimen for measurement. On the way of the air passage, is provided a capillary orifice
to convert airflow into pressure for display. This testing method consumes little time in measurement, so it is suitable for site management. The standard type measures smoothness and air permeability. The tester for smoothness or air permeability only is available.


Feature

  • Ease of maintenance for the specimen measurement section: it is easy to inspect and replace the measurement head and the specimen-pressuring plate.
  • The air pressure-adjusting water column (manometer) is made of stainless steel to prevent corrosion and rusting, considering long stability.
  • The dimensions of an orifice are determined through measurement of airflow at the air pressure medium value. Use of this method allows KRK to produce the testers of almost no inter-machine error in smoothness and in air permeability.

Spesification

Measurement area for smoothness 8.08 cm2
Measurement load for smoothness 8.08 kg
Total length of a measurement ring 733 mm
Measurement area for air-permeability

645.16 mm2 (1.00 in2)

Measurement range (change of nozzles)         
Median of smoothness: 100, 500, 1000 seconds
Median of air permeability 100, 500, 1000, 2000 seconds
Referential standard J. TAPPI No.5
Air source 0.5MPa
Outer dimensions 280x410x790 mm
Instrument weight 43 kg

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk Oken type smoothness and air-permeability tester (water column type )


NEWSLETTER

 
 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)