• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

MR-S10B four-ball friction testing machine

 

MR-S10B four-ball friction tester is based on sliding friction. It is mainly used to distinguish low, medium and high extreme pressure performance of lubricants under the condition of extremely high point contact pressure, including maximum no-bite load P , sintering load. P , comprehensive wear value ZMZ and other indicators. The machine can also be used for lubricant anti-wear performance test. If special accessories are used, the end face wear test can also be carried out to determine the friction coefficient of the friction coupler. The machine is mainly used in petrochemical, steel metallurgy, transportation and higher education institutions.



Spesification

 Serial number

project name

Specifications, parameters and indicators

1

Test force range ( N )

40 ~ 10000

2

Test force indication accuracy

Above 4% of the maximum test force, the relative error of the indication does not exceed ±1% , the relative error of the indication repeatability is not more than 1% ; below 4% of themaximum test force , the indication error does not exceed±5N , and the indication repeats The error is not more than 5N .

3

Test force maintains maximum allowable variation

±1% F N, less than 400N±5N

4

Friction measurement range (N)

 0 to 300

5

Friction indication accuracy

In the range of 10N ~ 300N , the relative error of indication value does not exceed ± 3% , and the relative error of indication repeatability is not more than 3%.

6

Spindle speed range (r/min)

200 to 2000

7

Spindle speed error ( r/min)

±10

8

Heater operating temperature range (°C)

Room temperature ~ 200

9

Temperature control accuracy (°C)

±2

10

Time setting range (s or min)

1 to 9999

11

Number of revolutions setting range

1 to 9999999

12

Standard test steel ball diameter (mm)

Φ12.7

13

Test machine dimensions (length × width × height) (mm)

760×860×1600

14

Test machine net weight (kg)

About 650

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk MR-S10B four-ball friction testing machine


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji