• 021 8690 6777
    021 8690 6771_
  • 0816 1740 8927
    0817 6700 726
  • Pin: 2856BC08
    New PIN : 5A357BF9
  • 0816 1740 8925
    0812 8006 9024
    0812 9595 7914

  • 0813 1066 1358

  • sales@alatuji.com

     


Embedded Strain Gauges EM Series

 

The EM is composed of two end pieces joined by a tube that protects a length of steel wire. The wire is sealed
in the tube by a set of o-rings on each end piece. Both end pieces have a fl at circular fl ange to allow transfer
of concrete deformation to the wire. An electromagnet is fitted at the center of the gauge. Strain developing in
the concrete modifi es the tension in the wire, therefore changing its resonant frequency, which is read by the
electromagnet. The EM-5 is the standard model and is used in different types of structures, as mentionned above. The EM-10 consists of a rugged version to be embedded in concrete with coarse aggregates. The shorter EM-2 model is designed for laboratory use or for limited spaces. Unless specifi ed otherwise, the  gauge tension is factoryadjusted at mid-range. The gauge is very compliant. It does not induce stresses
in the host media and can therefore be embedded in young curing concrete as well as in hard, synthetic materials such as resins, fi berglass and urethane. A thermistor inside the EM supplies information on the
effects of temperature on the materials.


Feature

  • Long-term reliability.
  • High resolution and accuracy.
  • 3000 Microstrain range.
  • Very high compliance.
  • Rugged construction.
  • Temperature reading.
  • Flanges fi tted with mounting holes.
  • Frequency signal easy to process and transmit over long distances.

Spesification

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni

Download PDF

Tidak ada file catalog untuk produk ini


Artikel Terkait dengan Produk Embedded Strain Gauges EM Series


NEWSLETTER

 
 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)