Portable System
Integrated Online Monitoring
Material Testing Machine
Vibration Sensor
Integrated Online Monitoring
Portable System
Adhesive Testing
Boxes & Cartons
Composite Films
Films & Foils
Label
Alat Industri Sipil
Engine Industries
Food & Beverage Industries
Pharmacy Industries
Paper Industries
Plastic Industries
Power Industries
Automotive Industries
Electronic Industries
Packaging Industries
Manufacture Industries
Rubber Industries
Oil and Gas Industries
Printing Testing Equipment
Jasa Kalibrasi Alat dan Mesin Jakarta
NDT Portable System
NDT Online Monitoring
Weather Station
Data & Logger By Application
Data & Logger By Performence
Data & Logger By HOBO
Sensor Suhu
Sensor Jarak
Sensor Kecepatan
Sensor Tekanan
Gaya Puntir
Gaya Tekan
Sensor Posisi
Sensor Optik
Sensor Khusus
Sensor Warna
Unit Pemrosesan Sinyal
Pengukuran 2D/3D
Sensor Ketebalan
Sistem InspeksiVibration Instrument Dynamic Amplifier Model-4055
Feature
| Input characteristics | Micro connector for charge input. |
| Max input charge | 100,000pc |
| Pickup Sensitivity | 1.00-999pC/Unit |
| Measuring range | 0.1,0.3,1,3,10,30,100 Unit/V FS |
| Phase difference between channels | 3Hz-15KHz(within ±5?) |
| Freq responce | 2Hz-20KHz(±0.5dB) |
|
Microphone sensitivity |
1.00-99.9mV/Pa |
| Microphone power source | A built-in power for the condencer microphone. |
| Measuring range(10dB step) | 50-110dB/FS (10.0-99.9mV/Pa microphone is used at ×0.1 range) |
| 70-130dB/FS (The same range showing the front pannel) | |
| 90-150dB/FS (1.00-9.99mV/Pa microphone is used at ×1 range) | |
| Freq responce | "LIN" 10Hz-20KHz (±0.5dB) |
| "A" Weighing: Conformance with JIS or IEC for precision sound level meter. | |
| Phase difference between channels(LIN) | 10Hz-10KHz (within ±5?) |
Spesification
| ¦Listener/Talker Function via GB-IB | |
| Range setting | Same range setting all the channels or individual range setting channel by channel. |
| Cal-Meas selection | Simultaneous all channel selection. |
| Status reading | Amplifier unit type, pickup sensitivity range and microphone amplifier weighting can be read. |
| Output level reading | Specified channel's output level can be read in responce to the three step LED indicator. |
| SRQ function | Service request is transmitted when overload, command error or calibration status is detected. |
| ¦Manual operating functions | |
| Measuring range setting | Selected channel can be set with the UP/DOWN switch. |
| CAL signal | A calibration signal is simultaneously output from all the channels. |
| Output level | The output level of the specified channel is indicated with an analog meter. |
The Others |
|
| Rated output | ±1V/FS,Non-distortion maximum output voltage:±10V(typical). |
| Output impedance | 180Ω+100μ? |
| LED level indicator | One green LED is lit when the signal level exceeding-20dB, and two green LED are lit exceeding-10dB. |
| Over load indicator | Red LED is lit when the output voltage exceeding 1.4Vrms or exceeding the linear sphere. |
| CAL-signal | 300Hz, ±1V, sinusoidal wave. |
| Temperature, Humidity | 0-55°C , 90%RH max. |
| Size, weight | In case of 10CH type 420(W)×149(H)×300(D)mm, 9.5kg. |
| 4055-01:550g, 4055-02:600g, 4055-10M:1750g Portable cases are lined up from 4 to 10 channel type. | |
Inquiry
Video
Tidak ada video untuk produk ini
