• Alat Uji
  • eki.alatuji@gmail.com

  • Alat Uji
  • 021 8690 6777
    021 8690 6770
  • Alat Uji
  • 0813 1066 1358 (Ms. Eki)
    0812 9595 7914 (Mr. Parmin)
  • 0878 7867 0721 (Mr. Arya)

Stroboscope | LS-5-12000


The new LS-5-12000 Linear Strobe is designed for fixed mounting on all machinery that utilize a strobe for visual inspection including, rewinders, slitters and similar process equipment in the label printing and process market as well as many others markets including vibration analyzers, balancers, metal producing equipment and much more.

The LS-5's flash rate can be externally triggered by an external sensor/controller on the process machine or the LS-5-RCU Remote Controller can be optionally specified for this purpose. Refer to separate webpage on the LS-5-RCU.

The LS-5 produce a bright, sharp image under observation when the flash rate is synchronized with the "repeat rate" of the web material. The strobe operates using 24V DC (15 - 28V DC) using power already available on the machine or by using the our worldwide AC-DC power adapter available as an option.

The brightness, sharpness and uniform light output provided by the LS-5 is unmatched in the market based on it compact size and low cost. It is especially well-suited for use on narrow web equipment up to 16 inches in width (400 mm width) and even wider. Two or more units can be used together in a Master/Slave arrangement when wider web widths must be covered.


  • Unmatched brightness, sharpness and uniformity from any strobe in its class
  • Uses long-life Xenon U-tube which is easily replaced after 200 Million flashes
  • Extremely short flash duration of less than 5 microseconds (µs) provides for a super-sharp image for easy observation
  • Can be powered using 24V DC already available on the machine or using option AC-DC power adapter.
  • Externally triggered using industry standard TTL-type square-wave signal at rates up to 208Hz and even higher
  • Aluminum enclosure is efficiently dissipates heat eliminating the need for bulky heat sinks
  • Two (2) or more LS-5 Strobes can be connected to each other for wider web coverage
  • CE-certified for use worldwide
  • Threading holes provided for fixed-mounting on machine frame or articulating arm
  • Optional UV-Kit is offered to illuminate any UV printing requiring inspection. Includes special UV flashtube and lens.



Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :


Tidak ada video untuk produk ini


Download PDF

Tidak ada file catalog untuk produk ini

Artikel Terkait dengan Produk Stroboscope | LS-5-12000





Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)


Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)


Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)


Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji