• sales@alatuji.com

     

  • 021 8690 6777
    021 8690 6770
  • 0812 9595 7914 (Mr. Parmin)
    0813 1066 1358 (Ms. Eki)
    0812 8333 5497 (Mr. Muslim)
  • 0812 1248 2471 (Mr. Alfin)
    0819 4401 4959 (Mr. Arya)

Panel Tachometer | FAC-1

 

The FAC-1 converter is used to convert frequency inputs from speed sensors into a linear analog signal. The output signal can be set for the typical test and control ranges of 0 – 20 mA, 4 – 20 mA or 0 – 10 V. All configuration is performed via supplied software or can be pre-configured by factory upon order.

Optimized for control and monitoring applications in drive, system and process engineering, the FAC-1 converter can convert a wide variety of signals from rotational speed sensors, rotary pulse encoders or proximity switches. It can process NPN, PNP, push-pull or TTL outputs, as well as sine wave signals from tacho generators and passive sensors. The normalized signal provided by the FAC-1 converter means it can be easily connected to PC or SPS controllers, recorders or indicators.

Standard Output signal
The output signal is user-set via PC software to fit the respective measuring job. The output is then scaled to the MIN and MAX frequency range set in the paramters (see below). After programming an additional final adjustment of +/-10% can be done via the front panel

User-Set Parameters
> Output: 0...20mA or 4...20mA or 0...10VDC
> Max. Frequency: 25...18,000Hz
> Min. Frequency: 0...50% of max. frequency in Hz
> Period Count: 1...254 impulses per revolution
> Max. Measuring time: 100...5000ms
> Time Constant T1: 0...5000ms


Feature

  • Analog Output Signal is user slected between 0–20 mA, 4–20 mA or 0– 10V DC
  • Powered by 18 - 32V DC
  • 12 bit signal A-to-D resolution
  • Measuring time and period count is User-set to optimize for each application
  • Excellent linearity, high temperature stability and long-term stability
  • Setup can be factory set at time of order or configured using supplied PC software
  • DIN-Rail mount enclosure for easy installation
  • Galvanic Isolation between power input and signal output for trouble-free operation
  • CE and GL Certified

Spesification

Inquiry

Name :
Company :
Address :
Email :
Handphone :
Subject :
Product Name :
Product Type :
Message :
   

Video

Tidak ada video untuk produk ini

Testimoni


Artikel Terkait dengan Produk Panel Tachometer | FAC-1


NEWSLETTER

 

TESTIMONIALS

B2TKS

B2TKS
Sangat jarang perusahaan seperti ini di Indonesia!  Mereka terus-menerus mengikuti perkembangan inovasi engineering test & measurement, “nyambung” berdiskusi teknis dan berpengalaman, memiliki visi pengembangan teknologi pengukuran, pengujian, inspeksi dan monitoring.(Dr.-Ing. Ir. May Isnan - NDT Specialist B2TKS-BPPT)

Chevron

Chevron
Tim kerja Alat Uji dapat diandalkan. Sangat bagus dalam implementasi di lapangan. Secara umum kami puas dengan services nya!(Andre - HSE Chevron)

BPPT

BPPT
Saya baru sekali ini bertemu perusahaan engineering yang eksis seperti ini di Indonesia.  Sangat terbantu dengan solusi yang diberikan, sangat memuaskan!(Muksin Saleh, ST., MT - Fuel Conversion and Pollution Control Specialist, B2TE - BPPT)

BALITBANG

BALITBANG
Sistem monitoring yang disuplai oleh Alat Uji adalah yang tertinggi ratingnya sampai dengan saat ini dibandingkan sistem lain yang pernah kami miliki, Dengan sistem monitoring dari Alat Uji, Pengujian kami jadi lebih terkontrol karena ada visualisasi di sistemnya. (Gatot Sukmara - Badan Penelitian dan Pengembangan, Departemen Pekerjaan Umum)

 
Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji Alat Uji